Toshiba D-R17DTKB Setting a Disc to Protect, Finalising Discs, To cancel the disc protect

In stop mode, press [SETUP].

E7J70BD_EN.book Page 45 Monday, May 7, 2007 3:31 PM

Setting a Disc to Protect

VR

DVD-RW DVD+RW DVD+R

To prevent accidental over-recording, editing or erasing of recordings, you can protect them using the Setup menu.

Insert a recordable disc.

1

2 Select “DVD Menu” using [U / D], then press [ENTER/OK].

3 Select “Disc Protect OFF ON” using [U / D], then press [ENTER/OK].

4 Select “Yes” using [U / D], then press [ENTER/OK].

The disc is protected.

5 Press [SETUP] to exit.

Note

•The Disc Protect setting is available only when a disc recorded in VR or +VR mode is inserted.

•You can select only “Disc Protect ON OFF” when a protected disc is inserted.

To cancel the disc protect:

•Select “Disc Protect ON OFF” at step 3, then select “Yes”.

•If you insert a disc protected with this unit, “Disc Protect ON OFF” will appear instead of “OFF ON”.

Finalising Discs

Video	VR
DVD-RW	DVD-RW DVD-R DVD+RW

DVD+R

You will need to finalise discs to play them back in other players.

Finalising may take from several minutes up to an hour.

A shorter recording period on the disc will require a longer time period for finalisation. Do not unplug the mains cable during finalisation.

Insert a recordable disc before finalising.

1 In stop mode, press [SETUP].

2 Select “DVD Menu” using [U / D], then press [ENTER/OK].

3 Select “Finalise” using [U / D], then press [ENTER/OK].

4 Select “Yes” using [U / D], then press [ENTER/OK].

e.g.) VR mode DVD-RW disc

DVD Menu

Format
Finalise
Disc Protect OFF ON			disc?
Delete All Playlist	Finalise
		Yes
		No

Finalising will start.

To cancel finalising (DVD-RW disc only):

At step 4, press [STOP S]. Select “Yes” using [U / D], then press [ENTER/OK]. Finalising is cancelled and the unit switches to stop mode.

Do you want to cancel ?

Yes

No

Finalising 10%

If appears when [STOP S] is pressed, you cannot cancel finalising because the finalising has already reached at a critical point in its process.

If “No” is selected and [ENTER/OK] or [RETURN/BACK] is pressed, finalising is continued.

You cannot cancel finalising a DVD-R and

DVD+RW/+R disc once it has started.

EN 45

Introduction Connections Basic Setup Recording

Playback

Editing Function Setup Others