Toshiba ZP38 Series owner manual Dolby Digital, Delay time, Sound adjustment, Surround set up

Page 17

Dolby Digital

Dolby Digital is available from DVD players, some games console players, etc. These must be connected using a Scart or phono lead for the picture and an optical or a coaxial cable for the sound.

Arrange the speakers as shown on page 6 then set up the TV as follows:

1Connect the DVD to the TV using phono leads to the COMPONENT VIDEO INPUT or a Scart lead to EXT 2, and an optical or coaxial cable to to the optical/coaxial sockets, DA-1 or DA-2.

2Set the Digital input-1in the AV connection menu (see page 16) to EXT 2 if Scart 2 is used or EXT 4 if the equipment is connected to

COMPONENT VIDEO INPUT.

3If external front speakers are connected the External speaker switch on the back of the TV must be set to EXT (see page 6). The centre channel will not be heard without external front speakers connected.

4Make sure the rear speakers are connected, then in the Feature Menu press Q to select

Surround set up. Use Rto set the Rear speaker option in the Surround set up menu to YES.

5Press Q to select Surround out and set the option to SP OUT (Surround speakers out).

Surround set up

▼ Back

 

 

 

Rear speaker

▼

YES

▼

 

 

 

 

Surround out

▼

SP OUT

▼

Surround test

 

 

▼

Delay time

 

 

▼

 

 

 

 

If an external amplifier is to be used to power the surround speakers set the Surround out option to

EXTERNAL.

No sound will come from the surround sound terminals if this option is chosen.

Surround set up

▼ Back

 

 

 

Rear speaker

▼

YES

▼

 

 

 

 

Surround out

▼

EXTERNAL

▼

Surround test

 

 

▼

Delay time

 

 

▼

 

 

 

 

If the Rear speaker option is set to NO, no sound will be heard from the rear speakers and the Surround out option will not be selectable.

Delay time

If the rear speakers and seating are a long way from the TV, the sound from the rear speakers will reach you before the sound from the front. A higher setting in the Delay time option can restore the correct balance.

1Select Surround set up from the Feature menu.

2Select the Delay time option, use Sor Rto adjust the setting to a suitable value.

3Press EXIT to finish.

Sound adjustment

1Set the volume and balance of the front speakers.

2Play a Dolby Digital film and press Mon the remote control. The Surround menu will appear giving an indication of the channels available e.g. Dolby Digital 3/2 (see the table).

3Press P and Q to select the speakers, then use Sor Rto adjust. The number of adjustable speakers will depend upon the signal received from the DVD player.

4Press EXIT to finish. Alternatively select Surround test in the Surround set up menu.

In order to get full Dolby Digital the DVD player must be connected using the coaxial or optical links.

Dolby Digital

1/0 = Centre speaker only.

2/0 = Front Left and Front Right only. 2/1 = Front Left and Front Right +

Rear Left and Rear Right combined. 2/2 = Front Left and Front Right +

Independent Rear Left and Independent Rear Right.

3/0 = Front Left and Front Right and Centre. No Rear Speakers.

3/1 = Front Left and Front Right and Centre + Rear Left and Rear Right combined.

3/2 = Front Left and Front Right and Centre + Independent Rear Left and Independent Rear Right.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Toshiba Contents Air Circulation Safety PrecautionsHeat Damage Mains SupplyWhen in VCR or DVD mode Remote controlUPWhen in Teletext mode Inserting batteries and effective range of the remoteScart leads Connecting externalSETTING UP equipmentAerial cables Using an external amplifier Connecting the speakersPositioning the speakers Extension front speaker connectionsFront connections and controls Switching onUsing the controls and connections Auto tuning Set upPrevious settings Will be lost Exit for no change Selecting the language, Auto tuneManual tune Manual tuningManual tune Programme skip Select Manual tuning from the Set up menuProgramme skip Press OK to storeSorting programme positions Sorting programme positions, General and sound controlsSelecting programme positions Sound controlsWide Widescreen viewingPicture controls Picture size/position Geomagnetic adjustment *36 models onlyAutomatic format Widescreen Still pictureTimer TimerTime Display Panel lockInput selection Video signal Input selection Digital Audio signalOutput selection signal for Scart Input selection and AV connectionsSound adjustment Delay timeSurround set up Dolby DigitalDolby Pro Logic Digital Surround Processor Dolby Pro Logic Surround test modeDigital Surround Processor Surround sound modesNavigating pages using List Navigating pages using AutoCharacters and Modes Teletext informationTeletext Control buttons For use with SandR to view sub-pages when availableWith Sor Rchoose between AUTO, PAL, SECAM, Ntsc 4 or 3 Manual fine tuningSee teletext section Check that the External speaker switch has been set to EXTBeen selected Remove it by pressing CallCare and disposal Important InformationPlease take note Accessories DimensionsSubject Broadcast systems/channels

ZP38 Series specifications

The Toshiba ZP38 Series represents a significant advancement in the realm of high-performance audio technology, specifically tailored for discerning customers seeking superior sound quality and innovative features. This series is designed to meet the challenges of modern audio demands, delivering an immersive listening experience across various applications, from home entertainment to professional setups.

At the heart of the ZP38 Series is its state-of-the-art audio processing technology. Toshiba has incorporated advanced digital signal processing (DSP) capabilities that allow for real-time adjustments and enhancements to sound quality. This ensures clarity, precise audio reproduction, and an enjoyable listening experience whether you’re watching movies, playing video games, or enjoying music.

One of the key features that sets the ZP38 Series apart is its multi-room audio capability. This allows users to stream music seamlessly throughout different areas of their home. By leveraging Wi-Fi connectivity, the ZP38 Series can connect with other compatible devices, so users can control their audio environment from centralized applications, facilitating a cohesive audio experience.

The ZP38 Series also places a strong emphasis on compatibility. It supports various audio formats, including high-resolution files, providing audiophiles with the flexibility they need to enjoy their favorite media without compromising on sound fidelity. With built-in Bluetooth and Chromecast support, the ZP38 Series can easily connect to smartphones and tablets, making it incredibly user-friendly.

Furthermore, the ZP38 Series employs Toshiba's proprietary sound enhancement technologies, such as dynamic range control and room correction features. These technologies analyze the acoustic properties of the space and adjust the output accordingly, ensuring that sound delivery remains optimal no matter where the listener is situated.

Durability and design are additional highlights of the ZP38 Series. With a sleek, modern aesthetic, these devices not only perform excellently but also complement contemporary home decor. Constructed with high-quality materials, they are built to last while providing a premium look and feel.

In conclusion, the Toshiba ZP38 Series stands out with its blend of innovative technologies, robust performance, and user-centric features. Whether for personal enjoyment or professional applications, the ZP38 Series continues to set a benchmark in audio excellence, making it a compelling choice for anyone seeking to elevate their sound experience.
Top Page Image Contents