Characters and Modes, Teletext information

Teletext – setting up,

general information, Auto and List modes

This TV has a multi-page teletext memory, which takes a few moments to load. It offers two Modes of viewing text – AUTO will display FASTEXT, if available. LIST will store your four favourite pages.

Characters and Modes

Before using teletext choose the correct alphabet

(Character) and whether to view in LIST or AUTO mode.

1Select Teletext from the Set up menu.

2Highlight Character, press R to select the required character set.

Teletext

▼ Back
Character	▼	CHARACTER-1	▼
Mode	▼	AUTO	▼

Use CHARACTER-1for the UK

3Select Mode and with S or R choose AUTO or LIST then press EXIT.

Teletext information

The 6/7button:

To view teletext press 6/7. Press again to superimpose the teletext over a normal broadcast picture and again to return to normal viewing. Programmes cannot be changed until teletext is cancelled.

The first text page shown will be the initial page.

In AUTO mode this displays the main subjects available and their relevant page numbers.

In LIST mode this displays whichever page number is currently stored on the RED button.

In either mode any teletext page can be accessed by entering the 3 digit page number using the numbered buttons, pressing the coloured buttons or pressing

P f( P) to advance to the next page and P e( Q) to go back to the previous page.

Sub-pages

If there are sub-pages they will automatically load into memory without changing the page on screen.

Arrows will appear alongside the page number, indicating sub-pages have loaded.

To access the sub-pages press X(B)	☛	To alter	the
	volume sub-pages				by
then use S and R to view them.	must be cancelled
An indicator will show on the bottom			(	).
	pressing XB

left of the screen.

After a short time of inactivity the indicator will disappear. To access the sub-pages again press X(B). These sub-pages will remain available to view until another page is chosen or, in normal TV mode, the channel is changed.

Navigating pages using Auto

If FASTEXT is available four coloured titles will appear at the base of the screen.

To access one of the four given subjects, press the relevant coloured button on the remote control.

For further information on your particular text system(s), see the broadcast teletext index page or, consult your local Toshiba dealer.

Navigating pages using List

The four coloured choices at the bottom of the screen are numbers – 100, 200, 300 and 400, which have been programmed into the TV’s memory. To view these pages press the relevant coloured buttons.

To change these stored pages press the relevant coloured button and enter the 3 digit number. This number will change in the top left of the screen and in the coloured highlight.

Press OK to store. The bars at the bottom of the screen will flash white. Whenever OK is pressed all four page numbers showing at the bottom will be stored and the previous ones will be lost.

If OK is not pressed the selection will be forgotten when teletext is cancelled.

Other pages may be viewed by entering the 3 digit page number – but DO NOT press OK or these pages will be stored.