Toshiba 19SLV411U manual Setting the Hdmi audio mode, To set the Hdmi audio mode, Mode Description

Chapter 5: Setting up your TV

To manually add digital subchannels on a physical channel:

Use the Channel Numbers and the Dash ( ) on the remote control to enter the channel number (for example, 56–1).

If the channel is found, the number will be added to the list and the box will be unchecked.

If the channel is not found, a message will appear.

Note: Skipped channels cannot be selected

with or ; however, they can still be accessed using the number keys on the remote control.

To remove encrypted channels from the channel memory:

If an encrypted channel is accidentally added to the channel list by programming channels, you can remove the unwanted encrypted (non-viewable) channel while you are channel surfing. When you tunes to an encrypted channel, the following message will appear.

Digital Channel Is Encrypted - Press 1 on remote to remove channel

Press while the message is on the screen to remove the unnecessary channel from the channel list.

Setting the HDMI® audio mode

To set the HDMI® audio mode:

1Press and open the Sound menu.

2Highlight Audio Setup and press .

3Press ￿ or ￿ to select HDMI 1 Audio and then press ￿ or ￿ to select the HDMI 1 audio mode (Auto, Digital, or Analog). (Auto is the recommended mode.) See “Connecting an HDMI or DVI device to the HDMI® input” (￿￿page 17).

Mode Description

When viewing the HDMI 1 input, if digital audio from the HDMI input is

Auto available, it will be output. If not, the TV will automatically detect and output analog audio from the PC Audio input.

When viewing the HDMI 1 input,

Digital digital audio from the HDMI input will be output.

When viewing the HDMI 1 input,

Analog analog audio from the PC Audio input will be output.

4To save your settings, highlight Done and press .

Note: Because the PC and HDMI1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No” the HDMI 1 Audio setting changes to “Auto”. If PC Audio is set to “Yes” the HDMI 1 Audio setting is set to “Digital” and is grayed out in the menu. (Also see item 3 on page 13 and “Setting the PC Audio” on page 45.)

28