Toshiba 19SLV411U manual Using CableClear digital Noise Reduction, Using Mpeg Noise Reduction

Chapter 7: Using the TV’s advanced features

Using CableClear® digital Noise Reduction

The CableClear® digital Noise Reduction feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a noisy video cassette or disc.

To change the CableClear settings:

1Press and open the Picture menu, highlight

Noise Reduction and press .

2In the CableClear field, select your desired setting.

Note:

•If the current input is ANT/CABLE or VIDEO, the menu will display the text “CableClear”. The available selections are Off, Low, Middle, and High.

•If the current input is ColorStream HD, HDMI 1 or HDMI 2, the menu will display the text “DNR”. The available selections are Off, Low, Middle, and High. Low, Middle, and High will reduce the noise in varying degrees, from lowest to highest, respectively.

3To save the new settings, highlight Done and

press .

To revert to the factory defaults, highlight Reset

and press .

Using MPEG Noise Reduction

The MPEG Noise Reduction feature allows you to reduce visible interference caused by MPEG compression. Choices for MPEG Noise Reduction are Off, Low, Middle, and High. Off is automatically selected when this feature is disabled (“grayed out”).

To select the MPEG Noise Reduction level:

1Press and open the Picture menu.

2Highlight Noise Reduction and press .

3Press ￿ or ￿ to highlight the MPEG Noise Reduction field and then press ￿ or ￿ to select either Off, Low, Middle or High.

4To save the new settings, highlight Done and

press .

To revert to the factory defaults, highlight Reset

and press .

Using the Game Mode feature

You can use the Game Mode feature for shorter frame delays when playing a video game requiring split-second timing between the on-screen display and input from the controller (such as music creation and high-action games).

This feature is more effective for 480i and 1080i input signals.

Note: To use the Game Mode feature, the current video input must be Video, ColorStream HD, HDMI 1 or HDMI 2. The Game Mode cannot be turned on when any other video input, other than the above mentioned is selected.

To turn on Game Mode:

1Press and open the Picture menu, then highlight the Game Mode.

2Press ￿ or ￿ to select On.

To turn off Game Mode:

Select Off in step 2 above, change the video input, or turn the TV off and then on again.

Note: You can change the video input by pressing INPUT on the remote control

(￿ page 30).

54