Toshiba 19SLV411U manual Using the auto aspect ratio feature, Normal, Dot by Dot

Chapter 6: Using the TV’s features

Picture Size

4:3

Some program formats will display with sidebars and/or bars at the top and bottom.

Normal

(for VGA, SVGA, XGA, WXGA, and SXGA sources and Photo files)

“Normal” is a non-stretched display. Some input signal formats will display with sidebars and/or bars at the top and bottom.

Dot by Dot

(for VGA, SVGA, XGA, WXGA, and SXGA sources only)

The “Dot by Dot” picture is non-scaling display. Depending on the input signal formats, picture is displayed with sidebars and/or bars at the top and bottom. (Example: VGA input source)

*To view the hidden areas (such as subtitles or captions), see below “Scrolling the TheaterWide® picture”.

Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only)

You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input.

To set the scroll settings:

1Press and open the Picture menu.

2Highlight Theater Settings and press .

3In the Picture Size field, select either

TheaterWide 2 or TheaterWide 3 (you cannot scroll in any other mode).

4Press ￿ to highlight the Picture Scroll field.

5Press ￿ or ￿ to scroll the picture up and down as

needed.

6To save the new settings, highlight Done and

press . To revert to the factory defaults,

highlight Reset and press .

Note: When receiving a signal at 480i resolution, the picture scroll function may have limited adjustment range.

Using the auto aspect ratio feature

When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources is received:

•A 480i, 480p, 720p or 1080i digital signal from the

ANT/CABLE input

•A 480i signal from the VIDEO, ColorStream HD or DVD input

•A 480i, 480p, 720p, 1080i, 1080p or VGA (60Hz) signal from the HDMI 1/2 input

Aspect ratio of	Automatic aspect size
	(automatically selected when
signal source
	Auto Aspect is On)
4:3 normal	4:3
4:3 letter box	TheaterWide 2
16:9 full	Full
Not defined (no	The current picture size you
ID-1 data or	set under “Selecting the
HDMI aspect data)	picture size” on page 34.

Note: The auto aspect ratio feature is not applicable to PC input.

(continued)

36