Toshiba 19SL410U manual Selecting the cinema mode

Chapter 6: Using the TV’s features

*To view the hidden areas (such as subtitles or captions), see below "Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only)".

Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only)

You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input.

To set the scroll settings:

1Press and open the Picture menu.

2Highlight Theater Settings and press .

Picture

Mode	Sports
Picture Settings
Noise Reduction
Game Mode	Off
Theater Settings

3In the Picture Size field, select either

TheaterWide 2 or TheaterWide 3 (you cannot scroll in any other mode).

4Press T to highlight the Picture Scroll field.

5Press W or X to scroll the picture up and down as needed.

6To save the new settings, highlight Done and press

. To revert to the factory defaults, highlight Reset and press .

Note: When receiving a signal at 480i resolution, the picture scroll function may have limited adjustment range.

Using the auto aspect ratio feature

When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources is received:

•A 480i, 480p, 720p, 1080i digital signal from the

ANT/CABLE input

•A 480i signal from the Video or ColorStream HD input

•A 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from the HDMI 1/HDMI 2 input

Aspect ratio of	Automatic aspect size
signal source	(automatically selected when
	Auto Aspect is On)
4:3 normal	Normal (with sidebars)
4:3 letter box	TheaterWide 2
16:9 full	Full
Not defined (no	The current picture size you set
ID-1 data or	under "Selecting the picture
HDMI aspect data)	size" on page 33.

Note: The auto aspect ratio feature is not applicable to PC input.

To turn on the auto aspect ratio feature:

1Press and open the Picture menu.

2Highlight Theater Settings and press .

3In the Auto Aspect Ratio field, select On.

4To save the new settings, highlight Done and press

. To revert to the factory defaults, highlight Reset and press .

To turn off the auto aspect ratio feature:

Select Off in step 3 above.

Selecting the cinema mode

When you view a DVD (3:2 pulldown processed) from a DVD player connected to the Video, ColorStream HD (component video), or HDMI inputs on the TV, smoother motion can be obtained by setting the Cinema Mode to Film.

To set the Cinema Mode to Film:

(available for 480i and 1080i signals)

1Press and open the Picture menu.

2Highlight Theater Settings and press .

3In the Cinema Mode field, select Film.

4To save the new settings, highlight Done and press

. To revert to the factory defaults, highlight Reset and press .

To set the Cinema Mode to Video:

Select Video in step 3 above.

35