Toshiba D-R420KU owner manual 48 EN

Page 48

DV DUBBING

Note for DV dubbing

If you press [PAUSE F] at step 5, the tape will rewind to the point a few seconds preceding the paused point.

The unit does not send out the output signal to DVC.

For the proper operation, connect DVC to the unit directly. Do not connect this unit and DVC via any other unit.

Do not connect more than 1 DVC.

The unit can only accept DVC. Other DV device such as cable/satellite box or D-VHS VCR cannot be recognized.

If no video signal is detected from the DVC during DVC to DVD dubbing, the recording will be paused and “I” will flash on the TV screen. The recording will resume when the unit detects the video signal again.

When the DVC is in camera mode, refer to “Guide to DV and On-Screen Display” on page 46.

You cannot dub from DVC during timer standby mode.

During timer standby of either component, you cannot select L3(DV-IN) even on the component which is not in timer standby.

Date / time and cassette memory data will not be recorded.

Pictures with a copy-guard signal cannot be recorded.

A DV terminal is a terminal that can use the transmission mode conforming to the IEEE 1394 standards called “Fire Wire”. It serves as the interface that connects the PC and peripheral device such as “i.LINK” (registered trademark of SONY). It enables digital dubbing between DV devices with little degradation.

48 EN

E7PCAUD_DR420KU_EN.indd 48

2/6/2009 10:55:38 AM

Image 48
Contents Owner’s Record EditingPrecautions Symbol for Class ll Double InsulationAdditional Safety Instructions Precautions To Avoid the Hazards of Electrical Shock and FireLocation and Handling Installation Location Supplied AccessoriesDew Condensation Warning Avoid the Hazards of Electrical Shock and FireMaintenance Servicing Cleaning the CabinetCleaning Discs Cleaning the Disc Lens Disc HandlingContents Contents Features Recording CompatibilityPlayback EditingFeatures DVD-RW DVD+RWUnplayable Discs Color SystemsRegion Codes CD-DA CD-RWDisc Basic Setup Management Recording Playback Functional OverviewFront Panel Rear PanelInstalling the Batteries in the Remote Control Using a Remote ControlFunctional Overview Open the cover Insert batteriesIntroduction Connections Basic Setup On-Screen Display / Menu OFFConnections Basic Setup Guide to ON-SCREEN Displays and MenusTitle name information Introduction File name informationMain Menu Disc Basic Setup Management Recording Playback Editing Function Setup OthersFront Panel Display Guide Display MessageConnecting to an External Tuner ConnectionsTV Connection Overview Supplied cables used in this connection are as followsConnecting to a TV with an Hdmitm Compatible Port Hdmi Video Resolution and Actual Output SignalsConnections No supplied cables are used in this connectionConnecting to a TV with Component Video Input jacks Connecting to a TV with an S-Video Input JackConnecting to a TV with Audio / Video Input Jacks Connecting to a TV without Audio / Video Input JacksFunction Setup Others Playback EditingTo set up Hdmi Audio, refer to pages 82 To set up Dolby Digital, refer to pages 81Digital Audio Connection No supplied cables are used in these connectionsChannel Analog Audio Connection PlaybackInitial Setting Proceed to in Clock Setting onUse K / L to select your desired LanguageSetting the Clock Clock SettingPress Setup to exit Editing Function Setup OthersSettings for the Video Input In, then press EnterFormatting a Disc Choosing the Recording Format of a Brand-New DVD-RWUse K / L to select Format, then press Enter Use K / L to select Format Mode, then press EnterIf you want to cancel formatting, select No Formatting a DiscReformatting a Disc Manually Formatting is completed.100% is indicatedSetting a Disc to Protect Press Setup Use K / L to select DVD Menu, then press EnterUse K / L to select Disc Protect Use K / L to select Yes, then press EnterPress Setup and use K / L to Select General Setting, then pressAuto Finalizing EnterPlaying the Discs in Other DVD Players Finalizing a DiscFinalizing is completed 32 EN Recording Mode Information on DVD RecordingRestrictions on Recording VideoSettings for a Recording Setting for Auto ChapterPress Setup to exit Make Recording CompatibleSettings for a Recording Setting Aspect Ratio for Video ModeRecording Audio Select XP RecordingPress OPEN/CLOSE a to close the disc tray Follow the steps to record TV programsAlign the disc to the disc tray guide It may take awhile to load Disc completelyDisc Connections Basic Setup Management Recording Press REC I to start recordingPress Stop C to stop recording Will be displayed for 5 secondsTimer Recording Guide to Timer Programming DisplayBefore recording, make sure If you have not set the clock yetTimer Recording Use K / L to select a recording modePress Enter when all items are entered Press I/yON/STANDBY to set a timer programmingTo stop the timer recording in progress Hints for Timer Recording Priority of Overlapped SettingsDisc Connections Basic Setup Management Editing FunctionSatellite Link Preparation on this unitPress Stop C Satellite Link External device Connection to an External Device Settings for AN External Device Recording from an External Device Press OPEN/CLOSE a again to close the disc tray It takes awhile to load DiscRecording audio mode Indicator of dubbing functionDV Dubbing Guide to DV and On-Screen DisplayPress REC Mode repeatedly to Select a recording mode DV DubbingDVC to DVD Dubbing Use Input Select to select L3 DV-IN48 EN Structure of Disc Contents Information on PlaybackBasic Playback Direct PlaybackPress I/y ON/STANDBY Press Stop C once to stop playback temporarilyBasic Playback Playback from the Title ListUse K / L to select Play From Start, then press EnterPlaying Back an Audio CD and a CD-RW/-R with MP3/JPEG Files JpegUsing the Title/Disc Menu Playback will be paused and sound will be muted2Press Play B to return to the normal playback Special Playback Resume PlaybackSkipping TV Commercials During Playback Fast Forward / Fast Reverse PlaybackSpecial Playback Rapid PlaybackStep by Step Playback Slow Forward / Slow Reverse PlaybackMarker Setting ZoomDuring playback, press Display or Zoom Use / B to select to display the selection menuChasing Playback during Recording During recording, press Play BWhile viewing a TV broadcast via this unit, press Time Slip This unit start to record the TV broadcastSimultaneous Playback and Recording Selected title playback will startChapter To move to for chapter, press BUsing Skip j / Skip Using DisplaySearch Title/Chapter SearchSearch Time SearchAudio CD Repeat Playback Random PlaybackREPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE Show Program PlaybackSlide Show 5Press Play BSwitching Subtitles Switching Audio SoundtrackTOP Menu to display the disc menu If you press Audio , skip toSwitching Virtual Surround System Switching Camera Angles Selecting the Format of Audio and VideoReducing Block Noise Adjusting Black Level Your setting will be activatedUse K / L to select Black Level, then press Enter Use K / L to select OFF or ON, then press EnterInformation on Disc Editing Guide to a Title ListDisc Basic Setup Management Deleting TitlesAfter the disc is fully recorded Recording PlaybackSwitch between Original and Playlist Deleting TitlesUse K / L to select Title Delete, then press Enter Title list, original or playlist will appearDisc Connections Basic Setup Management Recording Playback CREATING/DELETING PlaylistAdding Titles to a Playlist Use K / L to select Add To Playlist, then press EnterCREATING/DELETING Playlist Erasing All PlaylistEditing Discs Putting Names on TitlesEditing Discs Putting Names on Titles cont’dGuide to Edit Title Name Setting Chapter Marks Use Skip H / GPress Return Press Return again and then Return or Stop C to exitHiding Chapters Use K / L to select Edit, thenUse Skip H or Skip G to decide the chapter to be hidden Press EnterVR mode DVD-RW playlist Deleting a Part of a TitleInstructions continue on the next Deleting a Part of a Title cont’d Use K / L to select Delete then press EnterPress Return and then Return or Stop C to exit For VR mode DVD-RW, press MENU/LIST to select Playlist For VR mode DVD-RW Proceed to stepDividing a Title Use K / L/s / B to select a desired title, then press EnterCombining Titles You can combine two titles into a single titleTwo titles will combine into a single title Setting or Releasing the Title Protection To protect a whole disc VR mode DVD-RW, DVD+RW/+R onlyConfirm the indication OFF ON. Press Enter again Use K / L to select Protect, thenSetting or Clearing All Chapter Marks at Once Then press EnterUse K / L to select Chapter Mark Use K / L to select the desired interval, then press EnterList of the Default Settings Setup Items highlight is the default ContentsList of the Default Settings Items highlight is the default ContentsGeneral Setting PlaybackUse K / L to select a desired item Then press EnterGeneral Setting Parental Lock Default OFFUse the Number buttons to enter the current password Playback cont’dAudio Out Disc Menu Language Default English Audio Language Default OriginalSubtitle Language Default OFF Angle Icon Default onOSD Language Default English Screen Saver Default 10 minutesFL Dimmer Default Bright DisplayDisplay cont’d ChipUse the Number Buttons to enter new access password Canadian French RatingProgressive Default OFF TV Aspect Default 169 WideVideo Selected itemFormat Default RGB Hdmi Audio Default on RGB Range Default NormalHdmi CEC Default OFF Hdmi cont’dReset All Select Yes using K / L , then press EnterReset the setting to default Editing Function Setup OthersTroubleshooting PowerRemote control PictureTroubleshooting Recording / Timer recording / EditingStop C Remedy HdmiFrequently Asked Questions Can I record to CD-RW/-R?Language Code Language CodeGlossary Specifications GeneralRecording Input / OutputLimited Warranty Limited WarrantyLimited Warranty LPLWHG2QH  HDUDUUDQW\RQ3DUWVDQG/DERXU$UELWUDWLRQDQGLVSXWH5HVROXWLRQ