Pioneer DV58AV_KU_EN operating instructions Hdmi troubleshooting

Page 44

08

44

HDMI troubleshooting

Problem

Remedy

 

 

No HDMI audio output.• Check whether or not HDMI Out (page 32) is set to Off.

This unit has been designed to be compliant with HDMI (High-Definition Multimedia Interface). Depending on the component you have connected, unreliable signal transfers may result.

If the front panel HDMI indicator is lit:

You won’t hear any sound from the HDMI output if the source component is only DVI/HDCP- compatible.

• If the front panel HDMI indicator is unlit then:

Make sure that you’ve selected this player as the HDMI input in the settings for the component you’re using. You may need to refer to the instruction manual of the component to do this.

Check that the HDMI cable is connected properly and that the cable isn’t damaged.

Check that components connected using the HDMI interface are switched on and HDMI compatible.

• Check that the PURE AUDIO indicator is not lit. If it is, press the PURE AUDIO button (See also Front panel on page 16).

No HDMI video output.

• Make sure that you’ve selected this player as the HDMI input in the settings for the component you’re

 

using. You may need to refer to the instruction manual of the component to do this.

 

• Check that the HDMI cable is connected properly and that the cable isn’t damaged.

 

• Check that components connected using the HDMI interface are switched on and HDMI compatible.

 

• This unit has been designed to be compliant with HDMI (High-Definition Multimedia Interface).

 

Depending on the component you have connected, using a DVI connection may result in unreliable

 

signal transfers.

 

• Make sure the resolution on this player matches that of the component you have connected using

 

HDMI. See Resolution (Max) on page 33 to change the HDMI resolution. See Resetting the output

 

resolution to the default setting with HDMI connection on page 15 if you want to reset the output

 

resolution.

 

• Check that the PURE AUDIO indicator is not lit. If it is, press the PURE AUDIO button (See also Front

 

panel on page 16).

 

• Depending on the HDMI cable being used, 1080p output may not appear correctly.

 

 

No multichannel HDMI audio.

• Make sure that the HDMI Out (page 32) is set to Auto or LPCM (5.1CH) and that SACD Playback

 

(page 34) is set to Multi-ch Area. See also About the HDMI audio output settings on page 38 and HDMI

 

output with DVD-Audio and SACD sources on page 38.

 

 

A connected DVI component (with

• This unit has been designed to be compliant with HDMI (High-Definition Multimedia Interface).

HDCP) doesn’t work with this

Depending on the component you have connected, using a DVI connection may result in unreliable

player.

signal transfers.

HDMI Control does not function. • Verify that the HDMI cable is firmly connected.

Make sure that this unit’s HDMI Control (page 34) is set to On.

Make sure that the HDMI Control for the connected components is set to On. For more information, refer to the operating manual for the connected component.

This function may not work properly if you have multiple components connected to a single plasma display or AV system (amplifier or AV receiver etc.). For more information refer to the operating manual of your plasma display or AV system.

You can enable HDMI Control by turning the HDMI Control setting to On for all components connected via HDMI cable. Check the video output from this unit once you have completed making connections and settings for all components. You will need to check the video output each time you change connected components or remove the HDMI cable.

Check whether the connected component supports HDMI Control or not. For more information refer to the operating manual of your plasma display or AV system (amplifier or AV receiver etc.).

Certain functions are not supported on some plasma displays.

This player does not support HDMI Control-compatible components other than those made by Pioneer.

This unit will not function properly with components that do not support HDMI Control, or when connected with components other than those made by Pioneer.

Note that HDMI Control may not operate properly if you do not use an HDMI cable that supports the HDMI 1.3 specification (Category 2) or later.

Note

Static electricity or other external influences may cause malfunctioning of this unit. In this case, unplug the power cord and then plug back in. This will usually reset the unit for proper operation. If this does not correct the problem, please consult your nearest Pioneer service center.

En

Image 44
Contents DVD Player Thank you for buying this Pioneer product Information to UserGrounding or Polarization Decibel Level Example To establish a safe levelOnce you have established a comfortable sound level Contents Features Hints on installation What’s in the boxPutting the batteries in the remote Don’tDisc/content format playback compatibility About MPEG-4 AAC WMA Windows Media Audio compatibilityAbout DivX video DivX video compatibilityRear panel To audio inputs To video inputs To power outletEasy connections Watching 1080i/720p/480p from the component video outputs Connecting using the S-Video outputConnecting using the component video output Connecting to an AV receiver Connecting the multichannel analog outputsConnecting the digital output TipConnecting using Hdmi Controlling this player via another Pioneer componentAbout Hdmi Control Changing the output resolutionAbout Hdmi Pure Audio Sacd SetupFront panel Part PrgsveGRP TitleFL Dimmer Remote controlUsing the remote control Setting up the remote to control your TV Using the TV remote control buttonsVolume + Input SelectEnter Press Enter to start setting up using the Startup NavigatorUse the / buttons to choose a language, then press Setting up the player for your TV Using the on-screen displaysSetting the language of this player’s on- screen displays ReturnPlaying discs Basic playback controls Play  StopResume and Last Memory DVD-Video and DivX disc menusVideo CD PBC menus NumbersFAQ Why won’t the disc I loaded play?Chapter Scanning discsPlaying in slow motion Frame advance/frame reverseSelect the thumbnail image for what you want to play Browsing DVD or Video CD disc with the Disc NavigatorSelect a view option Looping a section of a disc Using repeat play Select a repeat play optionUsing random play Creating a program listSelect a random play option Repeat to build up a program listSwitching subtitles Switching audio language/channelsSearching a disc Zooming the screenDisplaying disc information Switching camera anglesDuring playback, press Angle to switch angle Audio Settings menu Video Adjust menuDialog Audio DRCUsing the Initial Settings menu Digital Audio Out settingsWide Video Output settingsTV Screen Display settings Options settingsSpeakers settings StereoParental Lock DTS DownmixAbout DivX VOD content Audio Output ModePlaying DivX VOD content Displaying your DivX VOD registration codeMPEG-4 AAC DTS CD About the audio output settingsDVD About the Hdmi audio output settings Hdmi output with DVD-Audio and Sacd sourcesMPEG1 HdmiSpeaker Installation Default settings L/R Large C Large SL/SR LargeSW OnSpeaker Distance Use the / cursor up/down to select a speakerTaking care of your player and discs Resetting the player Selecting languages using the language code listScreen sizes and disc formats DVD-Video regionsTroubleshooting COAXIAL/OPTICAL Hdmi troubleshooting Glossary Aspect ratioCountry/Area, Country/Area code, Country/Area code letter Language code listCountry/Area code list Specifications Pioneer Corporation