Pioneer DV-F727 Video Settings, Press STANDBY/ON on the front panel Press Setup

Adjusting Audio

and Video

Settings

Using the Setup Screen Menus

The procedure on this page describes how to operate the menus on the Setup screen. These menus are used to set and adjust a number of system settings. The various functions that can be adjusted are covered throughout this manual. The procedure on this page provides a basic outline for using the Setup screen menus.

When setting up for the first time

It is recommended to set up the player using the Setup Navigator (page 20). If you selected “Not Used” when the Setup Navigator appeared, you may still set up the player using the Setup Navigator in the General menu screen.

If you choose not to use the Setup Navigator, be sure to make the necessary settings in the Setup screen Audio 1, Audio 2, Video, and Language menus as described on the following pages.

Note

If the Setup screen is opened during playback of a DVD being viewed in the letter box format, the screen may switch to the wide screen format. This is not a malfunction, and the screen will return to normal when the Setup screen is closed.

1

2

3,4,5,6

(Cursor)

4 1 Á￿¢￿

ë￿

7 3 8

1

1 Press ( STANDBY/ON on the front panel).

2 Press SETUP.

The Setup screen appears.

(Example)

Audio1 2 Video Language General

Dolby Digital Out – Dolby Digital

DTS Out – Off

96kHz PCM Out – 96kHz 348kHz MPEG Out – MPEG 3PCM

Setup audio

Digital output format/tone adjust

Move SETUP Exit

3 Move the cursor control joystick right or left to select the menu you want.

As each menu is selected with the cursor, the settings appear below the menu heading.

4 Move the cursor control joystick down to enter the menu.

The top item within the menu becomes highlighted.

(Example)

Audio1	2	Video	Language		General
Dolby Digital Out				Dolby Digital
		DTS Out -		Dolby Digital 3PCM
96kHz PCM Out – 96kHz 348kHz
		MPEG Out – MPEG 3PCM
Switch Dolby Digital audio mode
		Move
						SETUP	Exit

5 Move the cursor control joystick up or down
to select the setting you want to change.
The options available for each setting appear to the									DISCMANAGEMENT/ ADJUSTINGAUDIOAND
right when the setting is selected. The current
setting appears with the setting indicator lit.
6 Move the cursor control joystick right to enter
the setting options.
(Example)
	Audio1	2	Video	Language		General			VIDEO
	96kHz PCM Out – 96kHz 348kHz
	Dolby Digital Out				Dolby Digital
			DTS Out -		Dolby Digital 3PCM
			MPEG Out – MPEG 3PCM						SETTINGS
	Output Dolby Digital
			Move
							SETUP	Exit

•Not all menu options can be changed while a disc is playing. In these cases, the options appear grayed out on the screen and cannot be adjusted. To change these settings, press STOP 7 first before pressing SETUP.

•Operating the menu after pressing STOP 7 may cancel the resume function.

•Some menu options are not immediately effective if set while a disc is playing. To make these settings effective, stop playback and then start again, or change the settings while the disc is stopped.

39