Pioneer DV-F727 operating instructions Getting both players set up, Video connections

3 Make video connections from the Slave player to either the VIDEO IN or S-VIDEO IN jacks corresponding to the type of video connections made from the Master player to the TV or AV component.

•This player does not perform any processing of the video signals. Therefore, video signals input at the VIDEO IN jacks are not output from the S-VIDEO OUT jacks, and video signals input at the S-VIDEO IN jacks are not output from the VIDEO OUT jacks.

•Component video connection from the Slave player is not possible.

Video connections

When composite video connection is made to a TV or monitor, make composite video connections from the VIDEO OUT jack on the Slave player to the VIDEO IN jack on the Master player.

To a TV or monitor

OUT

VIDEO

IN

OUT

VIDEO

IN

Slave DV-F727 player

S-video connections

When S-video connection is made to a TV or monitor, use a commercially available S-video cable to make S-video connections from the S-VIDEO OUT jack on the Slave player to the S-VIDEO IN jack on the Master player.

To a TV or monitor

OUT

S-VIDEO

IN

OUT

S-VIDEO

IN

After Master-Slave connections have been made between two DV-F727 players

After connections between the two units have been made, when the power is turned on, “-MASTER-” will appear in the display window of the Master player and “–SLAVE–” will appear in the display window of the Slave player, and the two players will perform as a single unit.

Getting both players set up...

After connections have been made, it is recommended to use the Setup Navigator for simultaneous setup of both players. Settings made in the Setup Navigator are applied to both players, however, the settings in the Setup screen are applied to each player separately. When Setup screen settings are changed during playback, the setting is applied to the operating player. Because some settings cannot be changed during playback, stop disc playback before attempting to make changes.

Notes

• The power of the Slave player is turned on and off when the Master player is turned on and off.

STANDBY/ON on the Slave player will not work.

• The remote control will not operate when it is pointed at the Slave player. Point the remote control at the Master player to control the Slave player.

• The only button that can be used on the Slave player is OPEN/CLOSE to open and close the hood on the Slave player.

• When loading discs in the players, discs in the Master player are numbered from 1 to 300 and discs in the Slave player are numbered from 301 to 600.

• Single loader play on the Slave player is not possible.

• Make system control connections and CD-Deck synchro connections to the Master player only. Even after CD-Deck synchro connections are made to the Master player, the Slave player playback cannot be used for the CD-Deck synchro function.

• When connecting a commercially available PS/2 compatible keyboard or mouse for text input and other player functions, be sure to make connections to the Master player only.

• When Update All is performed, both players start at the same time, and are shut off when the player with more discs has finished the updating process. When Update Add is performed,

the discs in the Master player are updated first, followed by

the discs in the Slave player, and then both systems are ADVANCED restarted simultaneously.

FUNCTIONS

Slave DV-F727 player

67