Pioneer DV-79AVi-s operating instructions Video Settings menu, Adjust the picture quality settings

The Video Settings menu 07

3 Adjust the picture quality settings.

• Detail – Adjusts the sharpness of edges

in the picture.

Memory1

Recall Settings
Prog. Motion	fast
PureCinema
YNR	soft
CNR	min
Sharpness High	min
Sharpness Mid	min

1/3

Memory1

slow

Auto 1

fine

max max max

• White Level – Adjusts the intensity of

white.

• Black Level – Adjusts the intensity of

black.

• Black Setup – Setup to correct the

floating black color for better 3-dimen-

sional realism.

•Use the joystick (up/down) to select a setting.

•Use the joystick (left/right) to adjust the current setting.

•Press DISPLAY to switch between full and single view.

•You can recall the preset number from the Recall Settings menu item.

You can adjust any or all of the following picture quality settings:

•Prog. Motion – Adjusts the motion and still picture quality when the player is set to progressive video output. This has no effect when set to ON.

•PureCinema – When watching DVD movies, PureCinema optimizes the picture quality. The default setting is Auto1, but if the picture appears unnat- ural, then set to Auto2, ON or Off, as appropriate.

•YNR – Adjusts the amount of noise reduc- tion in the Y (brightness) part of the video signal.

•CNR – Adjusts the amount of noise reduc- tion in the C (color) part of the video signal.

•Sharpness High – Adjusts the sharpness of the high-frequency (detailed) elements in the picture.

•Sharpness Mid – Adjusts the sharpness of the mid-frequency (less detailed) elements in the picture.

• Gamma – Adjusts the brightness of

darker images.

• Hue – Adjusts the overall color balance

between red and green.

• Chroma Level – Adjusts how saturated

colors appear.

• Chroma Delay – Adjust to correct the gap

between the Y and C components in the

video signal.

When the HDMI output is connected, the following options also appear:

•HDMI Detail – Adjusts the sharpness of edges in the HDMI video signal.

4Press ENTER to save the preset and exit the Video Adjust screen.

•Video on a DVD discs may be either video material (originally shot on video) or film material (originally shot on film). Video material has a frame rate of 30 frames/ sec.(NTSC), compared with 24 frames/ sec. for film. This player converts film material to 60 frames/sec. (in progressive scan mode). PureCinema adjusts the picture so that it matches more closely the picture quality of a cinema screen.

59

En