Pioneer DV-79AVi-s operating instructions Hdmi Settings, Sacd Playback, Default setting 2ch Area

Initial Settings menu 08

•This setting reverts to DVD-Audio(default) when the disc tray is opened, or the power is switched into standby.

HDMI Settings

You only need to make this setting if you connected this player to an HDMI-compatible component using the HDMI connector.

SACD Playback

• Default setting: 2ch Area

Initial Settings
Digital Audio Out	Parental Lock
		2ch Area
Video Output	Bonus Group	Multi-ch Area

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Parental Lock	3	Off (jp)
Bonus Group
Auto Disc Menu	3	On
Group Playback	3	Single
DVD Playback Mode	3	DVD-Audio
SACD Playback	3	2ch Area
HDMI Settings

Language	Auto Disc Menu	CD Area
Display	Group Playback
Options	DVD Playback Mode
Speakers	SACD Playback
i.LINK Setup	HDMI Settings

SACD discs can be divided up into several different areas — stereo audio (2ch Area), multi-channel audio (Multi-ch Area) and, for hybrid SACDs, standard CD audio (CD Area). Select which you want to listen to.

•For multi-channel audio from the i.LINK and 5.1 channel analog outputs, SACD playback must be set to Multi-ch Area.

•If you select an area that isn’t on the disc loaded, a different area of the disc will play. For example, if you choose standard CD audio but the disc loaded is not a hybrid SACD, the stereo SACD audio will play.

After selecting HDMI from the Initial Settings menu, the HDMI settings menu appears. For example, if you connected a Pioneer display, the following menu should be displayed:

Resolution	720x480 P
Aspect Ratio	16:9 (Wide)
Colour	Component (12bit)
Video Memory	Direct
Audio	Linear PCM

With DVI-compatible devices (with HDCP), the same screen is shown, but with the audio setting grayed-out (there is no audio with DVI):

Resolution	720x480 P
Aspect Ratio	16:9 (Wide)
Colour	Component (12bit)
Video Memory	Direct
Audio	Linear PCM

•Use the joystick (up/down) to select a setting.

•Use the joystick (left/right) to adjust the current setting.

•After you’ve finished, press ENTER to confirm any settings you’ve made and return to the Initial Settings menu.

You can adjust any or all of the following HDMI settings (the same options are avail- able for DVI/HDCP-compatible devices):

71

En