Pioneer DV-79AVi Channel Level, Move the cursor left to go back to, Speaker Distance screen

Page 76

08Initial Settings menu

The center speaker (C) and subwoofer (SW) can be set from –6.5 ft. to +6.5 ft. relative to the front left/right speakers.

Surround left/right (LS/RS) speakers can be set from –20 ft. to +6.5 ft. relative to the front left/right speakers.

4 Move the cursor left to go back to the

speaker list if you want to modify another

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

speaker, or press ENTER to exit the

Speaker Distance screen.

Speaker Distance settings do not affect SACD playback.

Channel Level

• Default setting: Fix

You can set the individual channel levels between –6dB and +6dB in 0.5 dB incre- ments using the test tone output as a guide to set the correct levels. Adjust the levels until the output level from all channels sounds the same from your usual listening position. Note that Audio Output Mode (page 74) must be set to 5.1 Channel in order to use the test tone.

Automatic: Select Auto to start the test tone output. No sound will be heard from the subwoofer.

You only need to make this setting if you connected this player to your amplifier using the 5.1 channel analog outputs.

These settings do not affect any digital audio output.

Initial Settings

 

 

Digital Audio Out

Audio Output Mode

Fix

Video Output

Speaker Installation

Variable

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

Language

Speaker Distance

Display

Channel Level

Options

 

Speakers

 

i.LINK Setup

 

When set to Fix, the level of each of the 5.1 channel analog outputs is fixed. Choose Vari- able if you want to adjust the relative levels to balance the surround sound better for your listening room.

As the test tone plays through each speaker in turn, it is highlighted on-screen. Use the Joystick (up/down) to adjust the channel output level of the current speaker. Move the cursor left to exit the test tone sequence, or ENTER to save the settings and exit the channel level setting screen.

Manual: Use the Joystick to move the cursor up/down to select a speaker.

76

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

En

Image 76
Contents DV-79AViDV-79AVi-s Wash hands after handling Grounding or Polarization POWER-CORD Caution We Want You Listening For a LifetimePage Contents Video Settings menu Initial Settings menuVideo Adjust Creating your own presetsBefore you start FeaturesBefore you start Chapter Before you start Using the remote control Putting the batteries in the remote controlBefore you start What’s in the box General disc compatibility CD-R/RW compatibilityDVD-R/RW Compatibility Super Audio CDCompressed Audio Compatibility PC Created Disc CompatibilityDVD-Video regions Before you start Titles, chapters, groups and tracksCDs, SACDs and Video CDs are divided into tracks Connecting up Connecting up ChapterRear panel Digital Audio OUT Optical / CoaxialConnecting up Control in / OUTVideo OUT 1&2 Component Video OUTConnecting up Easy connections To power outletConnecting using an S-Video output Connecting up Using other types of video outputConnecting using the component video output Connecting up Connecting for multichannel surround sound Connecting using the multichannel analog outputsConnecting using a digital audio output Digital OpticalConnecting using i.LINK Connector AV receiverAbout i.LINK Creating an i.LINK networkConnecting using Hdmi HdmiAbout Hdmi Controlling this player from another Pioneer componentControl Controls and displays Controls and displays ChapterFront panel 10 11 12Controls and displays About progressive scan videoPart PrgsveGRP TitleControls and displays Remote control JOG JOG Mode VolumeAngle SubtitlePreset code list Setting up the remote to control your TVManufacturer Preset Code Getting Started Switching onGetting Started Chapter Using the on-screen displays Press Enter again to finish setting upGetting Started Let’s Get Started Press Enter to move on to the next screenSetting up with the Setup Navigator Select ‘Setup Navigator’Getting Started Button What it doesSelect a DVD language Did you connect this player to an AV receiver?DTS Congratulations, setup is complete Getting Started Playing discs Basic playback controlsPress OPEN/CLOSE to open the disc tray Load a disc Press play to start playbackFront panel controls DVD disc menusButton Video CD PBC menus Displays the PBC menuWhy won’t the disc I loaded play? Disc may have been illegally copiedWhy does the volume level seem lower during Sacd playback? Playing discs Chapter Playing discsIntroduction Scanning discs To resume normal playback, press playPlaying discs Using the Multi Dial Playing in slow motionDuring playback, press Pause Press and hold Until Press repeatedly to change the slow motion speedPlaying discs Frame advance/frame reverse Looping a section of a discPlaying discs Using repeat play Using random playCreating a program list Select a random play optionRandom Title Random Chapter Random Off Random Group Random Track Random OffSelect ‘Create/Edit’ from the list of program options Repeat to build up a program List Editing a program listTo play the program list, press play Other functions available from the program menu Searching a discSelect a program play function Switching subtitles Switching the DVD audio languagePress Enter to start playback Press Subtitle repeatedly to select a subtitle optionSwitching DVD-RW audio channels Switching DVD-Audio audio channelsSwitching CD/MP3/Video CD audio channels Switching camera anglesDVD-RW displays Sacd displaysCD and Video CD Displays During PBC playback onlyAudio Settings menu Audio Settings menu ChapterDefault setting Off Audio DRCAudio Settings menu There are four settings, plus OffHi-Bit Virtual SurroundChannel Level Speaker Distance Video Settings menu Video Settings menu ChapterVideo Adjust Creating your own presetsVideo Settings menu Adjust the picture quality settingsVideo Settings menu Initial Settings menu Initial Settings menu ChapterUsing the Initial Settings Digital Audio Out settings Menu Default setting OnInitial Settings menu Dolby Digital OutDTS Out Linear PCM OutVideo Output settings Mpeg OutTV Screen Component OutLanguage settings Video OutStill Picture Audio LanguageSubtitle Language Auto LanguageDisplay settings Registering a new password OptionsBackground Screen SaverChanging your password Setting/changing the Parental Lock levelSelect ‘Password Change’ Use number buttons to enter your password, then press EnterSetting/changing the Country/Area code You may also want to refer to the Country/Area code list onBonus Group Select a new levelDVD Playback Mode Default setting SingleDefault setting DVD-Audio Auto Disc MenuDefault setting 2ch Area Hdmi SettingsSacd Playback Aspect Ratio ResolutionColour Default setting PCM Playback CD PlaybackVideo Memory AudioAudio Output Mode Speaker InstallationSpeakers DTS DownmixSpeaker Distance Default setting all speakers 10ftL and R speakers are paired you can’t set them differently Speaker Distance settings do not affect Sacd playback Channel LevelMove the cursor left to go back to Speaker Distance screenConnections Setup Link SetupAudio Out Auto Select Play Default setting 5.1 ChannelDVD-Audio Out Additional information Chapter Additional informationTaking care of your player and discs Additional information Resetting the player Screen sizes and disc formatsWidescreen TV users Standard TV usersAdditional information About the audio output settings DTS CDAdditional information About the Hdmi output settings DTSDTS CD DTS*2Component specification Hdmi output with DVD-Audio sourcesExample Format VSX-72TXVAdditional information About the i.LINK output settings Connections Setup Bitstream*1Mpeg Sacd Playback Ch AreaAdditional information Language code list Country/Area code listLanguage Language code letter, Language code Country/Area, Country/Area code, Country/Area code letterGlossary Dynamic range File extensionLink Interlaced videoPqls Precision Quartz Lock System rate control Progressive scan videoSampling frequency Slideshow DVD, Video CDAdditional information Troubleshooting ProblemGeneral Disc won’t play or is automatically ejected after loadingProblem Remedy DVD/CD/Video CD/ playerProblemRemedy Check that Linear PCM Out is set to Down Sample Off Right or sounds incompleteDialog Effectiveness of TruSurround varies with the discHdmi troubleshooting Bandwidth Digital Content Protection HdcpIsn’t damaged Be made with components compatible with both DVI and HighComponent you have connected using HDMI. See Hdmi Settings Make sure the resolution on this player matches thatOn page 71 to change the Hdmi resolution Link troubleshooting Output Mode is set to 5.1 Channel see Audio Output Mode onLINK-related messages Link CheckAdditional information Specifications Pioneer Electronics USA INC Pioneer Electronics of CANADA, INCPioneer Europe NV Pioneer Electronics DE Mexico S.A. DE C.V