Pioneer DV-2750, DV-470 Using the Initial Settings menu, Digital Audio Out settings

Video Output settings

Initial Settings menu

Chapter 7

Initial Settings menu

Using the Initial Settings menu

The Initial Settings menu provides audio and video output settings, parental lock settings, and display settings, among others.

If an option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the disc, then change the setting.

1 Press HOME MENU and select ‘Initial
Settings’.	Initial Settings

2Use the cursor buttons and ENTER to select the setting and option you want to set. All the settings and options are explained on the following pages.

Note

•In the table below, the default setting is shown in bold: other settings are shown in italics.

•The Digital Audio Out settings only need to be set if you have connected the digital output of this player to an AV receiver, or other equipment.

•Check the operating instructions supplied with your other equipment to see which digital audio formats it’s compatible with.

•Some settings, such as TV Screen, Audio Language and Subtitle Language may be overridden by the DVD disc. Often these settings can also be made from the DVD disc menu.

Digital Audio Out settings

Setting	Option	What it means
Digital Out	On	Digital audio is output from the digital outputs.
	Off	No digital audio output.
Dolby	Dolby	Dolby Digital encoded digital audio is output when playing a
Digital Out	Digital	Dolby Digital DVD disc.
	Dolby Digital >	Dolby Digital audio is converted to PCM audio before being
	PCM	output.
DTS Out	DTS	DTS encoded digital audio is output when playing a DTS disc.
		(Noise will be output if your amplifier/receiver is not
		compatible with DTS audio.)
	Off	No digital audio is output when playing a DTS disc.
96 kHz Out	96kHz > 48kHz	96kHz digital audio is converted to 48kHz for digital output.
	96kHz	96kHz digital audio is output as is at 96kHz.
MPEG Out	MPEG > PCM	MPEG encoded digital audio is converted to PCM audio for
		digital output.
	MPEG	MPEG encoded digital audio is output as is.

Setting	Option	What it means
TV Screen	4:3 (Letter Box)	Set if you have a conventional 4:3 TV. Widescreen movies are
(See also		shown with black bars top and bottom.
Screen sizes
	4:3 (Pan & Scan)	Set if you have a conventional 4:3 TV. Widescreen movies are
and disc		shown with the sides cropped so that the image fills the
formats on
		screen.
page 20.)
	16:9 (Wide)	Set if you have a widescreen TV.
Compo-	Interlace	Set if your TV is not compatible with progressive scan video.
nent Out
	Progressive	Set if your TV is compatible with progressive scan video (see
		your TV’s instruction manual for details). See also Switching
		the video output to interlace using the front panel controls on
		page 8.
		DV-470 only: Note that progressive scan video is only output
		from the component video jacks.
		DV-2750/DV-370 only: Note that progressive scan video is only
		output from the component video jacks and that there is no
		output from the composite and S-video jacks when this setting
		is selected.
AV Connec-	Video	Ordinary (composite) video output, compatible with all TVs.
tor Out
	S-Video	Almost the same quality as RGB, but can give better results if
		you’re using a long SCART cable.
	RGB	If your TV is compatible, this setting gives the best picture
		quality.

Language settings

Setting	Option	What it means
Audio Lan-	English	If there is an English soundtrack on the disc then it will be
guage		played.
	Languages as dis-	If there is the language selected on the disc, then it will be
	played	played.
	Other Language	Select to choose a language other than the ones displayed
		(see page 21).
Subtitle	English	If there is are English subtitles on the disc then they will be
Language		displayed.
	Languages as dis-	If there is the subtitle language selected on the disc, then it
	played	will be displayed.
	Other Language	Select to choose a language other than the ones displayed
		(see page 21).

18

En

English