Additional information
Please note that many widescreen discs override the player’s settings so that the disc is shown in letter box format regardless of the setting.
Note
•Using the 16:9 (Wide) setting with a standard 4:3 TV, or either of the 4:3 settings with a widescreen TV, will result in a distorted picture.
Setting the TV system
The default setting of this player is AUTO, and unless you notice that the picture is distorted when playing some discs, you should leave it set to AUTO. If you experience picture distortion with some discs, set the TV system to match your country or region’s system. Doing this, however, may restrict the kinds of disc you can watch. The table below shows what kinds of disc are compatible with each setting (AUTO, PAL and NTSC).
1 | If the player is on, press STANDBY/ON to switch it to standby. | ||
2 | Using the front panel controls, hold down | then press STANDBY/ON to switch the | |
TV system. |
|
| |
The TV system changes as follows: |
| ||
| • AUTO | NTSC |
|
| • NTSC | PAL |
|
| • PAL | AUTO |
|
Note
• You have to switch the player into standby (press | STANDBY/ON) before each change. | ||||
|
|
|
|
|
|
Disc |
| Player setting |
|
|
|
Type | Format | NTSC |
| PAL | AUTO |
|
|
|
|
|
|
DVD/Super VCD | NTSC | NTSC |
| PAL | NTSC |
| PAL | NTSC |
| PAL | PAL |
Video CD | NTSC | NTSC |
| PAL | NTSC |
| PAL | NTSC |
| PAL | PAL |
CD/ | — | NTSC |
| PAL | NTSC or PAL |
no disc |
|
|
|
|
|
|
|
|
|
|
|
Resetting the player
Use this procedure to reset all the player’s settings to the factory default.
1Switch the player into standby.
2Using the front panel buttons,
hold down the (stop) button and press STANDBY/ON to switch the player back on.
All the player’s settings are now reset.
Power reset
Use this procedure to switch the power off if the player is unresponsive to any control from the front panel or remote.
1 Press and hold the front panel STANDBY/ON for 10 seconds.
When the power is completely off, you cannot use the remote to switch it back on again. Use the front panel STANDBY/ON button.
DVD-Video regions
All
The diagram below shows the various DVD regions of the world.
1
2 | 5 |
|
| 1 | |
| 6 | |
| 2 | |
4 | 5 | 3 |
| ||
2 |
| 4 |
Selecting languages using the language code list
Some of the language options (such as ‘DVD Language’ in the Setup Navigator) allow you to set your prefered language from any of the 136 languages listed in the language code list on page 22.
1 | Select ‘Other Language’. | |
2 | Use the | (cursor left/right) buttons to select either a code letter or a code number. |
3 | Use the | (cursor up/down) buttons to select a code letter or a code number. |
See Language code list on page 22 for a complete list of languages and codes.
English
21
En