Pioneer DV-45A operating instructions Photo CD / DVD-RAM / DVD-ROM, Cd-Rom

Page 10

01Before You Start

Disc / Content Format Play- back Compatibility

General Disc Compatibility

•This player was designed and engi- neered to be compatible with software containing one or more of the following logos.

DVD-Audio DVD-Video DVD-R DVD-RW

Audio CD Video CD

CD-R

CD-RW

Super Audio CD

•Other formats, including but not limited to the following, are not playable in this player:

Photo CD / DVD-RAM / DVD-ROM /

CD-ROM

(except those that contain MP3 files formatted as specified in the “Com- pressed Audio Compatibility” section)

•DVD-R/RW and CD-R/RW discs (Audio CDs and Video CDs) recorded using a DVD Recorder, CD Recorder or Personal Computer may not be playable on this machine. This may be caused by a number of possibilities, including but not limited to: the type of disc used; the type of recording; or damage, dirt or condensation on either the disc or the player’s pick-up lens.

Special note about particular formats or software follows below:

10

CD-R/RW Compatibility

•This unit will play CD-R and CD-RW discs recorded in CD Audio, Video CD, or MP3 audio formatting. However, any other content may cause the disc not to play, or create noise/distortion in the output.

•This unit cannot record CD-R or CD-RW discs.

•Un-finalized CD-R/RW discs recorded in CD Audio can be played, but not all Table of Contents (playing time, etc..) will be displayed.

DVD-R/RW Compatibility

•This unit will play DVD-R/RW discs that were recorded using the DVD Video format.

•This unit will play DVD-RW discs that were recorded using the Video Record- ing format.

•This unit cannot record DVD-R/RW discs.

•Un-finalized DVD-R/RW discs cannot be played in this player.

Compressed Audio Compatibility

•This unit will play compressed audio files formatted in the MPEG-1 Audio Layer 3 format (MP3) with a 44.1 or 48kHz fixed bit rate. Incompatible files will not play and “UNPLAYABLE” will be displayed on the unit.

•Variable Bit-Rate (VBR) files are playable, but playing time may not be shown correctly.

•The CD-ROM used to compile your MP3 files must be ISO 9660 Level 2 compli- ant.

•CD physical format: Mode1, Mode2 XA Form1.

•This player only plays tracks that are named with the file extension “.mp3” or “.MP3”.

En

Page 9 Page 11
Image 10
Page 9 Page 11
Contents DV-45A Important Safety Instructions For U.S. model Important NoticeFor Canadian model Page Connecting using the multichannel analog ContentsConnecting for multichannel surround CD-R/RW CompatibilitySetting/changing the CountryCode Creating your own progressive outputBefore You Start Features DVD-Audio and Sacd compatibleUsing the remote control Putting the batteries in the remote controlBefore You Start What’s in the box Photo CD / DVD-RAM / DVD-ROM CD-ROMBefore You Start CDs, SACDs and Video CD are divided into tracksDigital Audio OUT Optical / Coaxial Connecting Up Rear panelControl in / OUT Video OUTConnecting Up Easy connections Connecting using an S-Video output Connecting Up Using other types of video outputConnecting using the component video output Connecting Up Connecting for multichannel surround soundConnecting using a digital output Controlling this player from another Pioneer component STANDBY/ON Controls and Displays Front panelOPEN/CLOSE Controls and Displays About progressive scan videoGRP TRK PartPrgsve RemainControls and Displays Remote control Preset code list Setting up the Remote Control toGetting Started Switching on Let’s Get Started Press Enter again to finish setting upGetting Started Press Enter to move on to the next screenSelect ‘Setup Navigator’ Getting Started Using the on-screen displaysSetting up with the Setup Navigator JoystickSelect a DVD language Did you connect this player to an AV receiver?Congratulations, setup is complete Press 0 OPEN/CLOSE to open the disc tray Load a disc Getting Started Playing discsBasic playback controls Press 3 play to start playbackStops playback Front panel controlsDVD disc menus ¢ Skips to the next track or chapterVideo CD PBC menus NumbersWhy won’t the disc I loaded play? Some MP3 tracks don’t show up. Where are they? Disc may have been illegally copiedUsing the Disc Navigator to browse the contents of a disc Playing Discs IntroductionFor CDs and Video CDs select a track MP3Playing Discs Scanning discs Using the Multi DialTo resume normal playback, press Play Press repeatedly to change the slow motion speed Playing Discs Playing in slow motionFrame advance/frame reverse Slow motion speed is displayed on- screenPress Enter on ‘BEnd Point’ to set the loop end point Playing Discs Looping a section of a discPress Enter on ‘AStart Point’ to set the loop start point Playing Discs Using repeat play Random Title Random Chapter Random Off Playing Discs Using random playSelect a random play option Random Group Random Track Random OffPlaying Discs Creating a program list Select ‘Create/Edit’ from the list of program optionsChapters/groups/folders/tracks Program list can contain up to 24 titlesTo play the program list, press Other functions available from the program menu Editing a program listSelect a program play function Playing Discs Searching a disc Press Enter to start playbackPress Subtitle repeatedly to select a subtitle option Playing Discs Switching subtitlesSwitching DVD-Video audio language Press Audio repeatedly to select an audio language optionSwitching CD/MP3/Video CD audio channel Playing Discs Switching DVD-RW audio channelSwitching DVD-Audio audio channel Switching camera anglesPlaying Discs Displaying disc information During PBC playback onlyAudio Settings Menu Audio DRC Audio Settings Menu Virtual Surround TruSurround’ or ‘Off’, as requiredAudio Settings Menu Channel Level Default setting Fix / all speakers 10 ftAudio Settings Menu Fix and Variable settings Set the distance for each speakerUse the joystick left/right to select a preset Video Settings Menu Video AdjustCreating your own interlace output presets Adjust the picture quality settingsCreating your own progressive output presets Video Settings MenuAjust the picture quality settings Digital Out Initial Settings Menu Using the Initial Settings menuDigital Audio Out settings Dolby Digital OutMpeg Out Initial Settings MenuDefault setting Mpeg PCM DTS PCMAuto Progressive Video Output settingsTV Screen Video OutDefault setting English Language settingsDefault setting Auto Still PictureDefault setting English Default setting On Subtitle Language Auto LanguageSubtitle Display Display settingsDVD Menu Language OSD LanguageBackground Angle IndicatorOptions Screen SaverSelect ‘Password Change’ Select ‘Password’Use the number buttons to enter a 4- digit password Enter a new passwordSelect ‘Country Code’ Use number buttons to enter your password, then press EnterSelect ‘Level Change’ Select a new levelBonus Group Auto Disc MenuDefault setting 2ch Area Group Playback DVD Playback ModeDefault setting Single Default setting DVD-Audio Sacd PlaybackSpeaker Installation Initial Settings Menu CD PlaybackAudio Output Mode SpeakersSpeaker Distance Default setting all speakers 10 ftL and R speakers are paired you can’t set them differently Front left/right speakers Use the joystick up/down to changeDistance Move the cursor left to go back toManual Move the cursor up/down to select a speaker Storing discs Additional Information Taking care of your player and discsHandling discs Discs to avoidAdditional Information Widescreen TV users Resetting the playerAdditional Information Screen sizes and disc formats Standard TV usersAdditional Information About the audio output settings Bitstream*3Language Language code letter, Language code Additional Information Language code listCountry code list Country, Country code, Country code letterDTS GlossaryMP3 Packed PCM DVD-Audio only Mpeg audioMpeg video PCM Pulse Code ModulationRemote control doesnt Additional Information TroubleshootingSettings are canceled Disc won’t play or is automatically ejected after loadingScreen is stretched or aspect does not change Video OFF buttonNo audio, or audio is dis- torted Cannot output 192kHz or CD volumeOutput 176.4kHz digital audioTruSurround Disc containing the MP3 tracks won’t playCan’t hear effect 96kHz linear PCM DVDGeneral Additional Information SpecificationsOther terminals TPTZW/02E00001 Printed

DV-45A specifications

The Pioneer DV-45A is a multi-format DVD player that gained a reputation for its versatility and performance in the early 2000s. Engineered with cutting-edge technology, it offered consumers an all-in-one solution for their video and audio entertainment needs.

One of the standout features of the DV-45A is its support for various disc formats, which included DVD-Video, DVD-Audio, CD, CD-R, and CD-RW. This made it a highly flexible player that could handle a wide range of media types, catering to both movie enthusiasts and audiophiles alike. The device seamlessly played both DVD video discs and audio CDs, and it offered playback compatibility for MP3 and WMA files, which were gaining popularity at that time.

The DV-45A utilized a high-quality video processing technology known as Progressive Scan, which ensured that images were rendered with exceptional clarity. This feature minimized flicker and enhanced the overall viewing experience by providing smoother images, especially when watching films and high-definition content. Additionally, the player supported Dolby Digital and DTS surround sound formats, providing rich audio experiences that could fill a room, making it a great option for home theater setups.

In terms of build quality, the DV-45A was designed with a sturdy chassis, which helped reduce vibration and noise during playback, contributing to a more immersive audio and video experience. The front interface was user-friendly, with easily accessible buttons and an intuitive remote control, allowing users to navigate through their media with ease.

The DV-45A also boasted a range of connection options, including Component Video, S-Video, and Composite Video outputs. This versatility allowed it to connect to various television sets and video projectors, ensuring compatibility with existing home entertainment systems. The digital audio outputs made it simple to connect to a surround sound receiver, further enhancing the cinematic experience.

Overall, the Pioneer DV-45A was a well-rounded and capable multi-format player, appealing to a broad audience looking for quality performance in both video and audio playback. Its combination of cutting-edge technologies, including Progressive Scan, robust audio support, and multi-format compatibility, made it an exemplary choice during its time, solidifying Pioneer’s reputation in the home entertainment industry.
Top Page Image Contents