Pioneer DV-45A operating instructions Why won’t the disc I loaded play?

Page 31

Getting Started

04

•After I load a DVD disc, it ejects automati- cally after a few seconds!

Most likely, the disc is the wrong region for your player. The region number should be printed on the disc; check it against the region number of the player (which you can find on the rear panel). See also page 11.

If the region number is OK, it may be that the disc is damaged or dirty. Clean the disc and look for signs of damage. See also page 68. Check also that the disc is aligned properly in the disc tray and that it’s loaded label-side up.

•Why won’t the disc I loaded play?

First check that you loaded the disc the right way up (label side up), and that it’s clean and not damaged. See page 68 for information on cleaning discs.

If a disc loaded correctly won’t play, it’s probably an incompatible format or disc type, such as DVD-ROM. See page 10 for more on disc compatibility.

•There’s no picture!

Check the front panel and make sure that the VIDEO OFF indicator isn’t lit. If it is, press the VIDEO OFF button to switch the video output back on. See also page 18.

Also make sure that if your TV isn’t compatible with progressive scan video, that the PROGRESSIVE indicator isn’t lit. If it is, press the PROGRESSIVE button to switch the video output back to interlace. See also page 18.

•I have a widescreen TV so why are there black bars at the top and bottom of the screen when I play some discs?

Some movie formats are such that even when played on a widescreen TV, black bars are necessary at the top and bottom of the screen. This is not a malfunction.

•I have a standard (4:3) TV and set the player to show widescreen DVDs in pan & scan format, so why do I still get black bars top and bottom with some discs?

Some discs override the display preferences of the player, so even if you have 4:3 (Pan & Scan) selected, those discs will still be shown in letterbox format. This is not a malfunction.

•My AV receiver is definitely compatible with 96/88.2kHz Linear PCM audio, but it doesn’t seem to work with this player. What’s wrong?

For digital copy-protection purposes, some 96/88.2kHz DVD discs only output digital audio downsampled to 48/44.1kHz. This is not a malfunction. To fully take advantage of the high sampling rate audio, connect the analog audio outputs to your amplifier/receiver.

•Why can’t I hear SACD audio through the digital outputs?

SACD audio is only available through the analog outputs. This is not a malfunction. Some DVD-Audio discs too only output audio through the analog outputs.

31

En

Page 30 Page 32
Image 31
Page 30 Page 32
Contents DV-45A Important Safety Instructions Important Notice For U.S. modelFor Canadian model Page CD-R/RW Compatibility ContentsConnecting for multichannel surround Connecting using the multichannel analogCreating your own progressive output Setting/changing the CountryCodeDVD-Audio and Sacd compatible Before You Start FeaturesUsing the remote control Putting the batteries in the remote controlBefore You Start What’s in the box CD-ROM Photo CD / DVD-RAM / DVD-ROMCDs, SACDs and Video CD are divided into tracks Before You StartVideo OUT Connecting Up Rear panelControl in / OUT Digital Audio OUT Optical / CoaxialConnecting Up Easy connections Connecting using an S-Video output Connecting Up Using other types of video outputConnecting using the component video output Connecting for multichannel surround sound Connecting UpConnecting using a digital output Controlling this player from another Pioneer component STANDBY/ON Controls and Displays Front panelOPEN/CLOSE About progressive scan video Controls and DisplaysRemain PartPrgsve GRP TRKControls and Displays Remote control Setting up the Remote Control to Preset code listGetting Started Switching on Press Enter to move on to the next screen Press Enter again to finish setting upGetting Started Let’s Get StartedJoystick Getting Started Using the on-screen displaysSetting up with the Setup Navigator Select ‘Setup Navigator’Did you connect this player to an AV receiver? Select a DVD languageCongratulations, setup is complete Press 3 play to start playback Getting Started Playing discsBasic playback controls Press 0 OPEN/CLOSE to open the disc tray Load a disc¢ Skips to the next track or chapter Front panel controlsDVD disc menus Stops playbackNumbers Video CD PBC menusWhy won’t the disc I loaded play? Disc may have been illegally copied Some MP3 tracks don’t show up. Where are they?Playing Discs Introduction Using the Disc Navigator to browse the contents of a discMP3 For CDs and Video CDs select a trackPlaying Discs Scanning discs Using the Multi DialTo resume normal playback, press Play Slow motion speed is displayed on- screen Playing Discs Playing in slow motionFrame advance/frame reverse Press repeatedly to change the slow motion speedPress Enter on ‘BEnd Point’ to set the loop end point Playing Discs Looping a section of a discPress Enter on ‘AStart Point’ to set the loop start point Playing Discs Using repeat play Random Group Random Track Random Off Playing Discs Using random playSelect a random play option Random Title Random Chapter Random OffSelect ‘Create/Edit’ from the list of program options Playing Discs Creating a program listChapters/groups/folders/tracks Program list can contain up to 24 titlesTo play the program list, press Other functions available from the program menu Editing a program listSelect a program play function Press Enter to start playback Playing Discs Searching a discPress Audio repeatedly to select an audio language option Playing Discs Switching subtitlesSwitching DVD-Video audio language Press Subtitle repeatedly to select a subtitle optionSwitching camera angles Playing Discs Switching DVD-RW audio channelSwitching DVD-Audio audio channel Switching CD/MP3/Video CD audio channelDuring PBC playback only Playing Discs Displaying disc informationAudio Settings Menu Audio DRC TruSurround’ or ‘Off’, as required Audio Settings Menu Virtual SurroundDefault setting Fix / all speakers 10 ft Audio Settings Menu Channel LevelFix and Variable settings Set the distance for each speaker Audio Settings MenuAdjust the picture quality settings Video Settings Menu Video AdjustCreating your own interlace output presets Use the joystick left/right to select a presetCreating your own progressive output presets Video Settings MenuAjust the picture quality settings Dolby Digital Out Initial Settings Menu Using the Initial Settings menuDigital Audio Out settings Digital OutDTS PCM Initial Settings MenuDefault setting Mpeg PCM Mpeg OutVideo Out Video Output settingsTV Screen Auto ProgressiveStill Picture Language settingsDefault setting Auto Default setting EnglishSubtitle Language Auto Language Default setting English Default setting OnOSD Language Display settingsDVD Menu Language Subtitle DisplayScreen Saver Angle IndicatorOptions BackgroundEnter a new password Select ‘Password’Use the number buttons to enter a 4- digit password Select ‘Password Change’Select a new level Use number buttons to enter your password, then press EnterSelect ‘Level Change’ Select ‘Country Code’Auto Disc Menu Bonus GroupSacd Playback Group Playback DVD Playback ModeDefault setting Single Default setting DVD-Audio Default setting 2ch AreaSpeakers Initial Settings Menu CD PlaybackAudio Output Mode Speaker InstallationSpeaker Distance Default setting all speakers 10 ftL and R speakers are paired you can’t set them differently Move the cursor left to go back to Use the joystick up/down to changeDistance Front left/right speakersManual Move the cursor up/down to select a speaker Discs to avoid Additional Information Taking care of your player and discsHandling discs Storing discsAdditional Information Standard TV users Resetting the playerAdditional Information Screen sizes and disc formats Widescreen TV usersBitstream*3 Additional Information About the audio output settingsCountry, Country code, Country code letter Additional Information Language code listCountry code list Language Language code letter, Language codeDTS GlossaryMP3 PCM Pulse Code Modulation Mpeg audioMpeg video Packed PCM DVD-Audio onlyDisc won’t play or is automatically ejected after loading Additional Information TroubleshootingSettings are canceled Remote control doesntScreen is stretched or aspect does not change Video OFF buttonNo audio, or audio is dis- torted 176.4kHz digital audio CD volumeOutput Cannot output 192kHz or96kHz linear PCM DVD Disc containing the MP3 tracks won’t playCan’t hear effect TruSurroundGeneral Additional Information SpecificationsOther terminals TPTZW/02E00001 Printed

DV-45A specifications

The Pioneer DV-45A is a multi-format DVD player that gained a reputation for its versatility and performance in the early 2000s. Engineered with cutting-edge technology, it offered consumers an all-in-one solution for their video and audio entertainment needs.

One of the standout features of the DV-45A is its support for various disc formats, which included DVD-Video, DVD-Audio, CD, CD-R, and CD-RW. This made it a highly flexible player that could handle a wide range of media types, catering to both movie enthusiasts and audiophiles alike. The device seamlessly played both DVD video discs and audio CDs, and it offered playback compatibility for MP3 and WMA files, which were gaining popularity at that time.

The DV-45A utilized a high-quality video processing technology known as Progressive Scan, which ensured that images were rendered with exceptional clarity. This feature minimized flicker and enhanced the overall viewing experience by providing smoother images, especially when watching films and high-definition content. Additionally, the player supported Dolby Digital and DTS surround sound formats, providing rich audio experiences that could fill a room, making it a great option for home theater setups.

In terms of build quality, the DV-45A was designed with a sturdy chassis, which helped reduce vibration and noise during playback, contributing to a more immersive audio and video experience. The front interface was user-friendly, with easily accessible buttons and an intuitive remote control, allowing users to navigate through their media with ease.

The DV-45A also boasted a range of connection options, including Component Video, S-Video, and Composite Video outputs. This versatility allowed it to connect to various television sets and video projectors, ensuring compatibility with existing home entertainment systems. The digital audio outputs made it simple to connect to a surround sound receiver, further enhancing the cinematic experience.

Overall, the Pioneer DV-45A was a well-rounded and capable multi-format player, appealing to a broad audience looking for quality performance in both video and audio playback. Its combination of cutting-edge technologies, including Progressive Scan, robust audio support, and multi-format compatibility, made it an exemplary choice during its time, solidifying Pioneer’s reputation in the home entertainment industry.
Top Page Image Contents