Pioneer DV-45A operating instructions Disc may have been illegally copied

Page 32

04Getting Started

•Is it better to listen to DVD-Audio discs through the analog outputs?

Some DVD-Audio discs do not output anything through the digital outputs, and multichannel discs are downmixed to stereo for the digital output. In addition, high sampling rate DVD-Audio discs (higher than 96kHz) automatically downsample audio output from the digital outputs.

Using the multichannel analog audio outputs for DVD-Audio have none of these limitations.

•My DVD-Audio disc starts playing, but then suddenly stops!

The disc may have been illegally copied.

•My CD with MP3 tracks won’t play!

Also make sure that the tracks are encoded in MPEG1 audio layer 3 format. See also page 10.

•Some MP3 tracks don’t show up. Where are they?

Filenames that don’t end with the extension “.mp3” won’t be recognized by this player. Also, if there are more than 250 folders or tracks on the disc, only the first 250 are recognized. See also page 11.

Image 32

Contents DV-45A Important Safety Instructions For U.S. model Important NoticeFor Canadian model Page Contents Connecting for multichannel surroundConnecting using the multichannel analog CD-R/RW CompatibilitySetting/changing the CountryCode Creating your own progressive outputBefore You Start Features DVD-Audio and Sacd compatibleBefore You Start What’s in the box Putting the batteries in the remote controlUsing the remote control Photo CD / DVD-RAM / DVD-ROM CD-ROMBefore You Start CDs, SACDs and Video CD are divided into tracksConnecting Up Rear panel Control in / OUTDigital Audio OUT Optical / Coaxial Video OUTConnecting Up Easy connections Connecting using the component video output Connecting Up Using other types of video outputConnecting using an S-Video output Connecting Up Connecting for multichannel surround soundConnecting using a digital output Controlling this player from another Pioneer component OPEN/CLOSE Controls and Displays Front panelSTANDBY/ON Controls and Displays About progressive scan videoPart PrgsveGRP TRK RemainControls and Displays Remote control Preset code list Setting up the Remote Control toGetting Started Switching on Press Enter again to finish setting up Getting StartedLet’s Get Started Press Enter to move on to the next screenGetting Started Using the on-screen displays Setting up with the Setup NavigatorSelect ‘Setup Navigator’ JoystickSelect a DVD language Did you connect this player to an AV receiver?Congratulations, setup is complete Getting Started Playing discs Basic playback controlsPress 0 OPEN/CLOSE to open the disc tray Load a disc Press 3 play to start playbackFront panel controls DVD disc menusStops playback ¢ Skips to the next track or chapterVideo CD PBC menus NumbersWhy won’t the disc I loaded play? Some MP3 tracks don’t show up. Where are they? Disc may have been illegally copiedUsing the Disc Navigator to browse the contents of a disc Playing Discs IntroductionFor CDs and Video CDs select a track MP3To resume normal playback, press Play Using the Multi DialPlaying Discs Scanning discs Playing Discs Playing in slow motion Frame advance/frame reversePress repeatedly to change the slow motion speed Slow motion speed is displayed on- screenPress Enter on ‘AStart Point’ to set the loop start point Playing Discs Looping a section of a discPress Enter on ‘BEnd Point’ to set the loop end point Playing Discs Using repeat play Playing Discs Using random play Select a random play optionRandom Title Random Chapter Random Off Random Group Random Track Random OffPlaying Discs Creating a program list Select ‘Create/Edit’ from the list of program optionsTo play the program list, press Program list can contain up to 24 titlesChapters/groups/folders/tracks Select a program play function Editing a program listOther functions available from the program menu Playing Discs Searching a disc Press Enter to start playbackPlaying Discs Switching subtitles Switching DVD-Video audio languagePress Subtitle repeatedly to select a subtitle option Press Audio repeatedly to select an audio language optionPlaying Discs Switching DVD-RW audio channel Switching DVD-Audio audio channelSwitching CD/MP3/Video CD audio channel Switching camera anglesPlaying Discs Displaying disc information During PBC playback onlyAudio Settings Menu Audio DRC Audio Settings Menu Virtual Surround TruSurround’ or ‘Off’, as requiredAudio Settings Menu Channel Level Default setting Fix / all speakers 10 ftAudio Settings Menu Fix and Variable settings Set the distance for each speakerVideo Settings Menu Video Adjust Creating your own interlace output presetsUse the joystick left/right to select a preset Adjust the picture quality settingsAjust the picture quality settings Video Settings MenuCreating your own progressive output presets Initial Settings Menu Using the Initial Settings menu Digital Audio Out settingsDigital Out Dolby Digital OutInitial Settings Menu Default setting Mpeg PCMMpeg Out DTS PCMVideo Output settings TV ScreenAuto Progressive Video OutLanguage settings Default setting AutoDefault setting English Still PictureDefault setting English Default setting On Subtitle Language Auto LanguageDisplay settings DVD Menu LanguageSubtitle Display OSD LanguageAngle Indicator OptionsBackground Screen SaverSelect ‘Password’ Use the number buttons to enter a 4- digit passwordSelect ‘Password Change’ Enter a new passwordUse number buttons to enter your password, then press Enter Select ‘Level Change’Select ‘Country Code’ Select a new levelBonus Group Auto Disc MenuGroup Playback DVD Playback Mode Default setting Single Default setting DVD-AudioDefault setting 2ch Area Sacd PlaybackInitial Settings Menu CD Playback Audio Output ModeSpeaker Installation SpeakersL and R speakers are paired you can’t set them differently Default setting all speakers 10 ftSpeaker Distance Use the joystick up/down to change DistanceFront left/right speakers Move the cursor left to go back toManual Move the cursor up/down to select a speaker Additional Information Taking care of your player and discs Handling discsStoring discs Discs to avoidAdditional Information Resetting the player Additional Information Screen sizes and disc formatsWidescreen TV users Standard TV usersAdditional Information About the audio output settings Bitstream*3Additional Information Language code list Country code listLanguage Language code letter, Language code Country, Country code, Country code letterMP3 GlossaryDTS Mpeg audio Mpeg videoPacked PCM DVD-Audio only PCM Pulse Code ModulationAdditional Information Troubleshooting Settings are canceledRemote control doesnt Disc won’t play or is automatically ejected after loadingNo audio, or audio is dis- torted Video OFF buttonScreen is stretched or aspect does not change CD volume OutputCannot output 192kHz or 176.4kHz digital audioDisc containing the MP3 tracks won’t play Can’t hear effectTruSurround 96kHz linear PCM DVDOther terminals Additional Information SpecificationsGeneral TPTZW/02E00001 Printed

DV-45A specifications

The Pioneer DV-45A is a multi-format DVD player that gained a reputation for its versatility and performance in the early 2000s. Engineered with cutting-edge technology, it offered consumers an all-in-one solution for their video and audio entertainment needs.

One of the standout features of the DV-45A is its support for various disc formats, which included DVD-Video, DVD-Audio, CD, CD-R, and CD-RW. This made it a highly flexible player that could handle a wide range of media types, catering to both movie enthusiasts and audiophiles alike. The device seamlessly played both DVD video discs and audio CDs, and it offered playback compatibility for MP3 and WMA files, which were gaining popularity at that time.

The DV-45A utilized a high-quality video processing technology known as Progressive Scan, which ensured that images were rendered with exceptional clarity. This feature minimized flicker and enhanced the overall viewing experience by providing smoother images, especially when watching films and high-definition content. Additionally, the player supported Dolby Digital and DTS surround sound formats, providing rich audio experiences that could fill a room, making it a great option for home theater setups.

In terms of build quality, the DV-45A was designed with a sturdy chassis, which helped reduce vibration and noise during playback, contributing to a more immersive audio and video experience. The front interface was user-friendly, with easily accessible buttons and an intuitive remote control, allowing users to navigate through their media with ease.

The DV-45A also boasted a range of connection options, including Component Video, S-Video, and Composite Video outputs. This versatility allowed it to connect to various television sets and video projectors, ensuring compatibility with existing home entertainment systems. The digital audio outputs made it simple to connect to a surround sound receiver, further enhancing the cinematic experience.

Overall, the Pioneer DV-45A was a well-rounded and capable multi-format player, appealing to a broad audience looking for quality performance in both video and audio playback. Its combination of cutting-edge technologies, including Progressive Scan, robust audio support, and multi-format compatibility, made it an exemplary choice during its time, solidifying Pioneer’s reputation in the home entertainment industry.