Pioneer DV-45A Audio Settings Menu Virtual Surround, TruSurround’ or ‘Off’, as required

Page 48

06The Audio Settings Menu

Virtual Surround

Default setting: Off

Switch on Virtual surround to enjoy surround sound effects from just two speakers.

When you play a Dolby Digital soundtrack, Virtual Dolby Digital, which uses TruSurround technology from SRS, produces a deep, realistic 3D soundspace from a pair of stereo speakers.

1Press SETUP and select ‘Audio Set- tings’ from the on-screen display.

Audio Settings

Video Adjust

Play Mode

Disc Navigator

Initial Settings

Setup Navigator

2Highlight TruSurround, then use the Joystick (left/right) to change to ‘2V/

TruSurround’ or ‘Off’, as required.

 

 

Audio Settings

1/ 2

 

 

 

 

 

 

 

 

 

 

Audio DRC

Off

 

 

 

Virtual Surround

Off

 

 

 

 

 

 

 

 

 

 

 

 

Channel Level

Fix

 

 

 

 

 

 

 

 

3Press ENTER to make the setting and exit the Audio Settings screen.

You can also use the SURROUND button on the remote control to switch Virtual Surround on (2V/ TruSurround)/Off.

Virtual Surround does not work with CD, MP3, DVD-Audio or SACD discs, or 96kHz Linear PCM soundtracks.

The Virtual Surround effect is output only through the analog AUDIO OUT (2ch) jacks.

Make sure that Audio Output Mode is set to 2 Channel (page 64).

How good the surround effect is varies with the disc.

48

En

Image 48
Contents DV-45A Important Safety Instructions For U.S. model Important NoticeFor Canadian model Page Contents Connecting for multichannel surroundConnecting using the multichannel analog CD-R/RW CompatibilitySetting/changing the CountryCode Creating your own progressive outputBefore You Start Features DVD-Audio and Sacd compatiblePutting the batteries in the remote control Using the remote controlBefore You Start What’s in the box Photo CD / DVD-RAM / DVD-ROM CD-ROMBefore You Start CDs, SACDs and Video CD are divided into tracksConnecting Up Rear panel Control in / OUTDigital Audio OUT Optical / Coaxial Video OUTConnecting Up Easy connections Connecting Up Using other types of video output Connecting using an S-Video outputConnecting using the component video output Connecting Up Connecting for multichannel surround soundConnecting using a digital output Controlling this player from another Pioneer component Controls and Displays Front panel STANDBY/ONOPEN/CLOSE Controls and Displays About progressive scan videoPart PrgsveGRP TRK RemainControls and Displays Remote control Preset code list Setting up the Remote Control toGetting Started Switching on Press Enter again to finish setting up Getting StartedLet’s Get Started Press Enter to move on to the next screenGetting Started Using the on-screen displays Setting up with the Setup NavigatorSelect ‘Setup Navigator’ JoystickSelect a DVD language Did you connect this player to an AV receiver?Congratulations, setup is complete Getting Started Playing discs Basic playback controlsPress 0 OPEN/CLOSE to open the disc tray Load a disc Press 3 play to start playbackFront panel controls DVD disc menusStops playback ¢ Skips to the next track or chapterVideo CD PBC menus NumbersWhy won’t the disc I loaded play? Some MP3 tracks don’t show up. Where are they? Disc may have been illegally copiedUsing the Disc Navigator to browse the contents of a disc Playing Discs IntroductionFor CDs and Video CDs select a track MP3Using the Multi Dial Playing Discs Scanning discsTo resume normal playback, press Play Playing Discs Playing in slow motion Frame advance/frame reversePress repeatedly to change the slow motion speed Slow motion speed is displayed on- screenPlaying Discs Looping a section of a disc Press Enter on ‘BEnd Point’ to set the loop end pointPress Enter on ‘AStart Point’ to set the loop start point Playing Discs Using repeat play Playing Discs Using random play Select a random play optionRandom Title Random Chapter Random Off Random Group Random Track Random OffPlaying Discs Creating a program list Select ‘Create/Edit’ from the list of program optionsProgram list can contain up to 24 titles Chapters/groups/folders/tracksTo play the program list, press Editing a program list Other functions available from the program menuSelect a program play function Playing Discs Searching a disc Press Enter to start playbackPlaying Discs Switching subtitles Switching DVD-Video audio languagePress Subtitle repeatedly to select a subtitle option Press Audio repeatedly to select an audio language optionPlaying Discs Switching DVD-RW audio channel Switching DVD-Audio audio channelSwitching CD/MP3/Video CD audio channel Switching camera anglesPlaying Discs Displaying disc information During PBC playback onlyAudio Settings Menu Audio DRC Audio Settings Menu Virtual Surround TruSurround’ or ‘Off’, as requiredAudio Settings Menu Channel Level Default setting Fix / all speakers 10 ftAudio Settings Menu Fix and Variable settings Set the distance for each speakerVideo Settings Menu Video Adjust Creating your own interlace output presetsUse the joystick left/right to select a preset Adjust the picture quality settingsVideo Settings Menu Creating your own progressive output presetsAjust the picture quality settings Initial Settings Menu Using the Initial Settings menu Digital Audio Out settingsDigital Out Dolby Digital OutInitial Settings Menu Default setting Mpeg PCMMpeg Out DTS PCMVideo Output settings TV ScreenAuto Progressive Video OutLanguage settings Default setting AutoDefault setting English Still PictureDefault setting English Default setting On Subtitle Language Auto LanguageDisplay settings DVD Menu LanguageSubtitle Display OSD LanguageAngle Indicator OptionsBackground Screen SaverSelect ‘Password’ Use the number buttons to enter a 4- digit passwordSelect ‘Password Change’ Enter a new passwordUse number buttons to enter your password, then press Enter Select ‘Level Change’Select ‘Country Code’ Select a new levelBonus Group Auto Disc MenuGroup Playback DVD Playback Mode Default setting Single Default setting DVD-AudioDefault setting 2ch Area Sacd PlaybackInitial Settings Menu CD Playback Audio Output ModeSpeaker Installation SpeakersDefault setting all speakers 10 ft Speaker DistanceL and R speakers are paired you can’t set them differently Use the joystick up/down to change DistanceFront left/right speakers Move the cursor left to go back toManual Move the cursor up/down to select a speaker Additional Information Taking care of your player and discs Handling discsStoring discs Discs to avoidAdditional Information Resetting the player Additional Information Screen sizes and disc formatsWidescreen TV users Standard TV usersAdditional Information About the audio output settings Bitstream*3Additional Information Language code list Country code listLanguage Language code letter, Language code Country, Country code, Country code letterGlossary DTSMP3 Mpeg audio Mpeg videoPacked PCM DVD-Audio only PCM Pulse Code ModulationAdditional Information Troubleshooting Settings are canceledRemote control doesnt Disc won’t play or is automatically ejected after loadingVideo OFF button Screen is stretched or aspect does not changeNo audio, or audio is dis- torted CD volume OutputCannot output 192kHz or 176.4kHz digital audioDisc containing the MP3 tracks won’t play Can’t hear effectTruSurround 96kHz linear PCM DVDAdditional Information Specifications GeneralOther terminals TPTZW/02E00001 Printed

DV-45A specifications

The Pioneer DV-45A is a multi-format DVD player that gained a reputation for its versatility and performance in the early 2000s. Engineered with cutting-edge technology, it offered consumers an all-in-one solution for their video and audio entertainment needs.

One of the standout features of the DV-45A is its support for various disc formats, which included DVD-Video, DVD-Audio, CD, CD-R, and CD-RW. This made it a highly flexible player that could handle a wide range of media types, catering to both movie enthusiasts and audiophiles alike. The device seamlessly played both DVD video discs and audio CDs, and it offered playback compatibility for MP3 and WMA files, which were gaining popularity at that time.

The DV-45A utilized a high-quality video processing technology known as Progressive Scan, which ensured that images were rendered with exceptional clarity. This feature minimized flicker and enhanced the overall viewing experience by providing smoother images, especially when watching films and high-definition content. Additionally, the player supported Dolby Digital and DTS surround sound formats, providing rich audio experiences that could fill a room, making it a great option for home theater setups.

In terms of build quality, the DV-45A was designed with a sturdy chassis, which helped reduce vibration and noise during playback, contributing to a more immersive audio and video experience. The front interface was user-friendly, with easily accessible buttons and an intuitive remote control, allowing users to navigate through their media with ease.

The DV-45A also boasted a range of connection options, including Component Video, S-Video, and Composite Video outputs. This versatility allowed it to connect to various television sets and video projectors, ensuring compatibility with existing home entertainment systems. The digital audio outputs made it simple to connect to a surround sound receiver, further enhancing the cinematic experience.

Overall, the Pioneer DV-45A was a well-rounded and capable multi-format player, appealing to a broad audience looking for quality performance in both video and audio playback. Its combination of cutting-edge technologies, including Progressive Scan, robust audio support, and multi-format compatibility, made it an exemplary choice during its time, solidifying Pioneer’s reputation in the home entertainment industry.