Pioneer AVH-P3100DVD manual Using the equalizer, Recalling equalizer curves

Section

19Available accessories

!Auto TA – Time alignment created by auto TA and EQ. (Refer to Auto TA and EQ (auto- time alignment and auto-equalizing) on page 92.)

!Custom – Adjusted time alignment that you can create for yourself

!Off – Turn the time alignment off

!TA Adjust – Adjust the time alignment as desired

#You cannot select Auto TA if auto TA and EQ has not been carried out.

#You cannot select TA Adjust when neither Front-L nor Front-R is selected in Position.

Using the equalizer

The equalizer lets you adjust the equalization to match the car’s interior acoustic character- istics as desired.

Recalling equalizer curves

There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves.

Display Equalizer curve

PowerfulPowerful

NaturalNatural

Adjusting the time alignment

You can adjust the distance between each speaker and the selected position.

!An adjusted time alignment is memorized in Custom.

1Touch Time Alignment and then touch

TA Adjust.

# You cannot select TA Adjust when neither Front-L nor Front-R is selected in Position.

2Touch a or b to select the speaker to be adjusted.

Each time you touch aor b selects the speak- er in the following order:

Front-L (front speaker left)—Center (center speaker)—Front-R (front speaker right)— Rear-R (rear speaker right)—Rear-L (rear

speaker left)—Subwoofer (subwoofer)

# You cannot select speakers whose size is set to Off. (Refer to Setting the speaker setting on page 87.)

3Touch c or d to adjust the distance be- tween the selected speaker and the listen- ing position.

Each time you touch cor d increases or de- creases the distance. 0.0inch to 200.0inch is displayed as the distance is increased or de- creased.

Vocal	Vocal
Flat	Flat
Custom1	Custom 1
Custom2	Custom 2
Super Bass	Super bass

!Custom1 and Custom2 are adjusted equal- izer curves.

!When Flat is selected, no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between Flat and a set equalizer curve.

1Touch Parametric EQ.

2Touch a or b to select the desired item. Each time you touch aor b selects the item in the following order:

Equalizer (equalizer)—SP-Select (speakers)— Band (bands)—Frequency (center frequency)

—Level (equalizer level)—Q. Factor (Q factor)

3Touch d to select the equalizer.

Touch d repeatedly to switch between the fol- lowing equalizers: Powerful—Natural—Vocal—Flat—Custom1

—Custom2—Super Bass

90 En