| Section |
Available accessories | 19 |
|
|
HD Radio™ tuner
Listening to HD Radio
1 2 | 3 | 4 |
5 | 7 | 8 9 |
6
You can use this unit to control an HD Radio tuner
1Source icon
Shows which source has been selected.
2Band indicator
Shows which band the radio is tuned to, AM or FM.
3Preset number indicator
Shows which preset has been selected.
4Frequency indicator
Shows the frequency to which the tuner is tuned.
5/ (signal reception status) indi- cator
When digital signal is received, is dis-
played. Otherwise, is displayed.
6 (HD station) indicator
Shows when the tuner is tuned to HD radio station.
7 (radio field strength) indicator Shows the radio field strength.
8/ (seek mode) indica-
tor
Shows the seek mode status.
9/ (reception mode) indicator
Shows the setup value of reception mode.
1Touch the source icon and then touch HD Radio to select the HD Radio.
2Touch Band to select a band.
Touch Band until the desired band (FM1, FM2, FM3 for FM or AM) is displayed.
3To perform manual tuning, briefly touch c or d.
#You can also perform manual tuning by press- ing cor d(TRK).
4To perform seek tuning, keep touching c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found.
#You can cancel seek tuning by briefly touching either cor d.
#If you keep touching cor dyou can skip sta- tions. Seek tuning starts as soon as you release the key.
#You can also perform seek tuning by pressing and holding cor d(TRK).
Storing and recalling broadcast frequencies
The operation is the same as that of the tuner. (Refer to Storing and recalling broadcast fre- quencies on page 18.)
Displaying text information
Desired information can be displayed.
%Touch INFO repeatedly to switch be- tween the following settings:
Call
Available accessories
En 71