Toshiba SD-V296KU manual Playback, Other Operations

VCR FUNCTIONS

Playback

Precautions

Before: Turn on the TV.

VCR

1	Insert a cassette tape		2	To start playback
	into this unit.
				PLAY
3	To stop playback		4	To eject the cassette tape
				OPEN/CLOSE
		STOP

4

2

3

1

4 3 2

Note:

•When a cassette tape without a record tab is inserted, the unit will start playback automatically.

•Tracking will be automatically adjusted upon playback. To adjust the tracking manually, use [TRACKING K / L] ([TRACKING/ ] on this unit) during playback.

Setup VCR

When You Playback a Cassette Tape Recorded in Hi-Fi Stereo

Press [AUDIO ] on the remote control, then select “HIFI” or “MONO”.	Your selection	HIFI		MONO
• During playing back non Hi-Fi tapes, [AUDIO ] on the remote control is not
	Type of recorded tape	L-channel	R-channel
available.	Hi-Fi tapes recorded in	L	R	L+R
	Hi-Fi stereo

Other Operations

Functions

To cue or review picture during playback (picture search)

Use [g] or [h] ([ g (FWD)] or [ h (REW)] on this unit).

•Press it again and the unit will search in super high speed. (in the SLP mode only)

To freeze the picture on TV screen during playback (still mode)

Press [PAUSE F]. Each time you press the button, the picture will be forwarded by one frame.

•If the picture begins to vibrate vertically in the still mode, stabilize

the picture by using [TRACKING K / L] ([TRACKING/] on this unit).

•If the picture is distorted or rolling vertically, adjust the vertical hold control on your TV if equipped.

To reset the cassette tape counter (counter reset)

Press [DISPLAY] to display the cassette tape counter on the TV. Press [CLEAR/C.RESET] to reset the counter to “0:00:00”.

To play back in slow motion (slow mode)

Press [PAUSE F] during playback, then press [g] ([ g (FWD)] on this unit).

•If you want to change speed in slow mode, press [g] or [h] ([ g (FWD)] or [ h (REW)] on this unit), slow speed will be more fast or slow mode.

•If the noise bars appear on the TV screen, you can reduce it by using

[TRACKING K / L] ([TRACKING/ ] on this unit).

To rewind the cassette tape automatically (auto rewind)

When a cassette tape reaches its end during playback, fast-forward or recording (except timer recording and one-touch timer recording), the cassette tape will automatically rewind to the beginning. After rewinding finishes, the unit will eject the cassette tape.

Note:

•To prevent damage to the cassette tape, still or slow mode will automatically stop after 5 minutes.

•To return to playback from the picture search, still or slow mode, press [PLAY B].

DVD Functions Information Español

Index Search

To search by index mark. The index mark will be made automatically at the beginning of each recording.

VCR

• Insert a cassette tape into this unit.

1	Press [SEARCH MODE] once.		INDEX SEARCH
	SEARCH
	MODE
				– –
2	To select index mark		INDEX SEARCH			01 ~ 20
				0 3
	or	beginning of		current program		end of the
		the contents				contents
			Pro.1	Pro.2	Pro.3	Pro.4 Pro.5
		02	01	01	02	03
					index mark
3	To rewind			ss
	To fast forward
				BB
4	When index mark is reached,		PLAY B
	playback automatically begins.

Note:

•The time gap between index marks should be more than 1 minute for SP mode, 2 minutes for LP mode and 3 minutes for SLP mode.

Time Search

To search by length of time.

VCR

• Insert a cassette tape into this unit.

1	Press [SEARCH MODE] twice.	TIME SEARCH
	SEARCH
	MODE	– : – –
2	Select the desired length of time	TIME SEARCH
	for fast forwarding or rewinding.	2 : 5 0
	or	0:01~ 9:59
	(1 minute~9 hours and 59 minutes)
3	To rewind	ss
	To fast forward	BB
4	When selected length of time is	PLAY B
	reached, playback will start

automatically.

Note for Index Search & Time Search:

•These functions are not available during recording.

•Press [STOP C] to stop the search.

•If a cassette tape ends during a search, your search will be canceled and the cassette tape will rewind to the beginning.

EN – 13 –

E8EB5UD_SD-V296KU_EN_ES_v1.indd 13

2008/07/14 10:37:03