Toshiba SD-V296KU manual Maintenance, Table of Contents

Page 5

Maintenance

SERVICING

Please refer to relevant topics on the “Troubleshooting” on page 27 before returning the unit.

If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug, and please call our help line to locate an Authorized Service Center.

CLEANING THE CABINET

Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.

CLEANING DISCS

When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

Do not use solvents such as benzine, thinner, commer- cially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

CLEANING THE DISC LENS

If this unit still does not perform properly although you refer to the relevant sections and to “Troubleshooting” in this Owner’s Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

DISC HANDLING

When you handle a disc hold it by its edge and try not to touch the surface of the disc.

Always store a disc in its protective case when it is not used.

AUTO HEAD CLEANING

Automatically cleans video heads as you insert or remove a cassette tape, so you can see a clear picture.

Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumu- lated on the video heads after a long period of use, or the usage of rental or worn cassette tapes can cause this problem. If a streaky or snowy picture appears during

playback, the video heads in your unit may need to be cleaned.

1.Please visit your local audio/video store and purchase a good quality VHS video head cleaner.

2.If a Video head cleaner does not solve the problem, please call our toll free customer support line found on the cover of this manual to locate an authorized service center.

Note:

Remember to read the instructions along with the video head cleaner before use.

Clean video heads only when problems occur.

Note to CATV system installer:

This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.

Table of Contents

 

PRECAUTIONS

 

Laser Safety

2

IMPORTANT SAFETY INSTRUCTIONS

3

Installation Location

4

Avoid the Hazards of Electrical Shock and Fire

4

Moisture Condensation Warning

4

About Copyright

4

Notice for Progressive Scan Output

4

Auto Power Off and Screen Saver Function (DVD Only)

4

Supplied Accessories

4

Symbols Used in this Manual

4

Maintenance

5

SETUP

 

Choosing a Disc / Cassette Tape

6

Playable Media

6

Unplayable Media

6

Index to Parts and Controls

7

Front Panel

7

Rear Panel

7

Remote Control

8

Installing the Batteries for the Remote Control

8

DVD Display Panel

9

VCR Display Panel

9

Selecting DVD or VCR Operation

9

Connections

10

Connection to RF Modulator (Not Supplied)

10

Connection to a TV

10

Connection to an Audio System

11

Connection to an External Tuner

11

Preparation for Use

12

Turning on Unit for the First Time

12

Clock Setting

12

VCR FUNCTIONS

 

Playback

13

When You Playback a Cassette Tape Recorded in Hi-Fi Stereo

13

Other Operations

13

Index Search

13

Time Search

13

Auto Repeat

14

Recording

14

Recording & One-touch Timer Recording (OTR)

14

Timer Recording

14

Notes for Timer Recording & One-touch Timer Recording (OTR)

15

Satellite Link

16

Copying a Cassette Tape

16

DVD to Cassette Tape Duplication

17

DVD FUNCTIONS

 

Playback

17

On-Screen Display

18

JPEG Playback

19

Search Functions

20

Using Track Search

20

Using Title / Chapter Search

20

Using Time Search

20

Marker Setting

20

Repeat / Random / Programmed Playback

21

Repeat Playback

21

Repeat A-B Playback

21

Random Playback

21

Programmed Playback

21

Special Settings

22

Subtitle Language

22

Audio Language

22

Camera Angles

22

Black Level Setting

22

Stereo Sound Mode

22

Virtual Surround

22

DVD Setting

23

LANGUAGE Setting

23

DISPLAY Setting

24

AUDIO Setting

24

PARENTAL Setting

25

OTHERS Setting

26

Reset to the Default Setting (Except for PARENTAL Setting)

26

INFORMATION

 

Troubleshooting

27

Specifications

28

Language Code List

28

LIMITED WARRANTY

29

Español

32

Precautions Setup VCR Functions DVD Functions Information Español

EN

– 5 –

E8EB5UD_SD-V296KU_EN_ES_v1.indd 5

2008/07/14 10:36:17

Image 5
Contents Below. Refer to these numbers whenever you communicate Owner’s RecordMake your contribution to the environment Laser SafetyPersonal Injury or Death Important Safety InstructionsSupplied Accessories Installation LocationSymbols Used in this Manual Avoid the Hazards of Electrical Shock and FireTable of Contents MaintenanceUnplayable Media Choosing a Disc / Cassette TapePlayable Media Front Panel 5 6 Index to Parts and Controls19 18 15 14 13 12Either side of center Keep in mind the following when using the remote controlApprox feet 7m within Feet 7mVCR Display Panel DVD Display PanelSelecting DVD or VCR Operation You must first select either DVD or VCR operationConnection to RF Modulator Not Supplied ConnectionsConnection to a TV Audio OUTSpecial note when connected to an external tuner Using the unit with an external tunerConnection to an Audio System Connection to an External TunerUal refer to remote control use Clock SettingPreparation for Use Turning on Unit for the First TimeOther Operations PlaybackTo stop recording temporarily pause mode Recording & One-touch Timer Recording OTRTimer Recording RecordingPress C/A STOP/EJECT on the unit To check, correct or cancel a timer programTo cancel a timer recording in progress Satellite Link Preparing for the Satellite Link Timer RecordingCopying a Cassette Tape Preparation on the tunerDisc Menu DVD to Cassette Tape DuplicationCalling Up a Menu Screen during Playback Resume PlaybackZoom On-Screen DisplaySlow Forward / Reverse Search Applicable Jpeg file Remarks Normal playback Slide Show ModeJpeg Playback Using Time Search Using Track SearchMarker Setting Using Title / Chapter SearchRepeat Playback Random Playback Repeat / Random / Programmed PlaybackRepeat A-B Playback Programmed PlaybackSpecial Settings Setup menu Language SettingDisplay menu Audio menu Parental menu Language menuAudio Setting Display SettingDisplay menu Audio menuEnter current 4-digit password Parental SettingEnter your new Digit password except Record the password in case you forget itReset to the Default Setting Except for Parental Setting Others SettingAuto Power OFF Default on Slide Show Default 5secSymptom Remedy TroubleshootingLanguage Code List SpecificationsHow to Obtain Warranty Services Limited WarrantyRental Units Commercial Units5HQWDO8QLWV $UELWUDWLRQDQGLVSXWH5HVROXWLRQ Instalación de las pilas del control remoto ConexionesConmutación VCR/DVD Ajuste del relojReproducción de la grabadora de vídeo Control remotoReproducción de DVD/CD Encienda el televisorMemo Memo 1VMN26053 / E8EB5UD