Toshiba MW27H62 owner manual Starting setup, Basic setup, Power, Enter

Basic setup

POWER

Starting setup

The STARTING SETUP function makes installing your unit easily. It leads you the Language selection, TV/CABLE selection and auto channel memory

automatically.	/
IMPORTANT: Make sure that the antenna or cable TV system connection	ENTER
is made!	CANCEL

Starting setup

1 Press POWER.

The starting setup function begins and the Language setup menu appears on the screen. Press or to select your desired language, then press ENTER.

LANGUAGE/IDIOMA/LANGUE

ENGLISH

ESPAÑOL

FRANCAIS

4 Now the “CH PROGRAM” and “AUTO CLOCK”starts.

After the starting setup is completed, the TV channel appears on the screen.

CH PROGRAM

ANALOG CH SEARCH

STOP : CANCEL

Basic setup

2 Press or to select “TV” or “CABLE”, then press ENTER.

CH PROGRAM

CHANNEL PLAN

DIGITAL CH SEARCH

TVSTOP : CANCEL

CABLE

Press or to select “START”, then press

3 ENTER.

If you select “CANCEL” and press ENTER, the STARTING SETUP stops and changes to the TV screen.

AUTO SETUP

START

CANCEL

￿￿￿￿￿￿￿￿￿￿￿￿￿

Notes:

•The starting setup function will work only when you press POWER for the first time.

•In “AUTO CLOCK” setting, it may take more than 10 minutes to read the EDS signal for one channel, which has only “Time of day” or “Local time zone”.

•The process of “CH PROGRAM” may take 15 - 30 minutes to complete, depending on your regional cable service.

•If you press CANCEL in the process of “CH PROGRAM”, you can do starting setup function again.

19

5V60101A [E]p19-22 19 2/22/06, 1:03 PM