Toshiba MW27H62 owner manual TV operation

TV operation

TV operation

TV operation

1 To turn on the unit, press POWER. The Power indicator will light.

• Every time you turn on the TV, the unit starts from TV/VCR mode. When you use TV/VCR after DVD operation, press TV/VCR.

POWER

Adjust the volume level by pressing VOL + or –.

2 The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases.

￿￿￿￿￿￿ ￿￿

3 Set the TV/CABLE selection to the appropriate position ￿￿.

	TV	- VHF/UHF channels
	CABLE - Cable TV channels
Press INPUT. Then press		/ or Number

4 buttons (0 or 1) to select the desired mode
	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
(0:ANALOG MODE, 1:DIGITAL MODE), then press
ENTER.
	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

5	Press CH /	or Direct channel selection
	buttons (0–9) and		button to select the		￿￿￿￿￿
	channel.
	To change to a specific
	channel (programmed
	or unprogrammed):
	Press Direct	channel
	selection buttons (0-9) on
	the remote control.
	For example, to select
	channel 125, press 1, 2, 5.
	To change to a specific digital channel:
	Press the first 3 digits, then press			, followed

by the remaining 3 digits. For example, to select channel 015-001, press 0, 1, 5, , 0, 0, 1.

TV	Cable TV
VHF	VHF
2-13	2-13
UHF	STD/HRC/IRC
14-69	14-36
	(A) (W)
	37-59
	(AA) (WW)
	60-85
	(AAA) (ZZZ)
	86-94
	(86) (94)
	95-99
	(A-5) (A-1)
	100-125
	(100) (125)
	01
	(5A)

Notes:

•Digital cable channels may be represented by channel numbers that include a “dash” (e.g., 85–002.) These digital channel numbers may not match the numbers in the channel line-up provided by your cable company. This is not a malfunction.

•If a channel with no broadcast is selected, the sound will auto- matically be muted.

•If a station being viewed stops broadcasting, the TV will auto- matically shut itself off after 15 minutes.

24

5V60101A [E]p23-29 24 2/22/06, 1:03 PM