VCR Operation Setup (Continued)
VCR Setup Menu Options
1Press MENU and the MAIN menu will appear.
2 Use v/V to select the SETUP menu, then press
ENTER.
The SETUP menu will appear.
Channel Selection
This DVD/VCR Receiver is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels
Preparation:
Connect the DVD/VCR Receiver to the desired type of antenna or cable TV system, as shown in Connecting Antenna/Cable TV to DVD/VCR Receiver on page 11.
3 Use v/V to choose a desired option on the SETUP menu. Then use b/B to choose a desired setting.
FUNCTION OSD
The
FUNCTION OSD can be switched between ON and OFF using b/B.
AUTO CHANNEL PROGRAMMING
1Press MENU and the MAIN menu will appear.
2 Use v/V to select the TUNING menu, then press
ENTER.
The TUNING menu will appear.
AUDIO MODE
The DVD/VCR Receiver has two separate audio playback sys- tems, the high quality VHS
AUDIO MODE can be switched between
BROADCAST TYPE (STEREO/SAP/MONO)
Multichannel Television Sound (MTS) carries stereo and/or Second Audio Program (SAP) bilingual signals. Set this display to the desired position when both MTS stereo and SAP signals are received. When only one of the MTS signal is received, the DVD/VCR Receiver automatically selects the corresponding receiving mode (Stereo or SAP) regardless of the selected posi- tion. For normal operation, the display should be in the STEREO position. The DVD/VCR Receiver will then record a STEREO pro- gram when available, and record a mono program IF the program is
NOT IN STEREO.
For weak STEREO and/or SAP broadcasts, changing the dis- play to mono may give clearer sound.
BROADCAST TYPE can be switched between STEREO, SAP, and MONO using b/B.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE
This display setting should normally be left in the stereo posi- tion, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels.
AUDIO OUTPUT can be switched between STEREO, LEFT, and RIGHT using b/B.
4Press MENU when finished.
3 Use V to choose the SOURCE SELECT option, then use b/B to select TUNER.
Press b/B repeatedly to switch between TUNER, LINE1(L1) and LINE2(L2).
4then use b/B to search for channels.
The tuner will automatically cycle through all
available channels in the area and place them in the tuner’s memory.v/V to choose the AUTO CHANNEL SET option,Use
5complete, make sure the TUNING BAND is set appropriately (TV or CATV) using v/V and choosing the correct TUNING BAND (TV or CATV) by using b/B while in the TUNING menu.
Remember, TV is for the air antenna reception, CATV is for cable or wireless cable connection.After the AUTO CHANNEL SET PROCEEDING is
6Press MENU to return to the TV screen.
7CH/PRESET (v/V) on the front panel to cycle the
DVD/VCR Receiver through the channels in memory.Use CH/TRK (v/V) on the remote control or
TO ADD OR ERASE CHANNELS FROM MEMORY
This feature allows you to add or erase channels in memory manually.
1Press V to choose the CH. ADD/DEL option on the TUNING menu. Use b/B to select a channel to add or erase.
2Press ENTER to add or erase the channel. Repeat steps 1 and 2 to add or erase channels.
3Press MENU to return to the TV screen.
18