Troubleshooting (Continued)
Symptom | Cause | Solution | ||
|
|
|
| |
INPUT, VOLUME v/V | Incorrect mode (e.g. Remote control in | Press DVD/CD, VCR or FM/AM to | ||
and b/B/v/V buttons on | TV mode). | select the correct mode on the remote | ||
remote control cannot |
| control. | ||
operate. |
|
|
| |
|
|
| ||
Some channels are | Those channels were deleted with the | Use CH. ADD/DEL to restore channels. | ||
skipped over when using | CH. ADD/DEL option. | See “Channel Selection” on page 18. | ||
CH/TRK (v/V) |
|
|
| |
Picture and sound of | Antenna or cables are loose. | Tighten connections or replace cable. | ||
broadcasting channel are |
|
|
| |
weak or missing. | Wrong CHANNEL SOURCE option is | Try all CHANNEL SOURCE options. | ||
| being used. | See “Channel Selection” on page 18 for | ||
|
| details. | ||
Camcorder image is not | Camcorder is off. | Turn camcorder on and operate | ||
shown. |
| properly. | ||
Camcorder image via | DVD/VCR Receiver INPUT SELECT is | Press INPUT to select LINE input chan- | ||
A/V input to DVD/VCR | not set to LINE1(L1) or LINE2(L2). | nel (LINE1(L1) or LINE2(L2)). | ||
Receiver is not shown on |
|
|
| |
TV screen. |
|
|
| |
Timer recording is not | Clock in DVD/VCR Receiver is not set | Set clock to correct time. See “Setting | ||
possible. | to correct time. | the Clock” on page 19. | ||
| Timer has been programmed | Reprogram Timer. See “Timer | ||
| incorrectly. | Recording” on pages 25 and 26. | ||
|
|
| ||
| indicator light does not appear after | Reprogram Timer. | ||
| programming timer. |
|
| |
Stereo Audio Record | TV is not | No action is possible. | ||
and/or Playback is not | ||||
Broadcast program is not in stereo for- | No action is possible. | |||
present. | ||||
mat. |
|
| ||
|
|
| ||
| DVD/VCR Receiver A/V Out jacks are | Make A/V connections. Stereo is | ||
| not connected to TV A/V In jacks. | available only via A/V output from | ||
|
| DVD/VCR Receiver. | ||
| DVD/VCR Receiver Audio/Video Out is | Select AUX or A/V source as TV input. | ||
| not selected for viewing at the TV. |
|
| |
|
|
| ||
| DVD/VCR Receiver BROADCAST | Set BROADCAST TYPE mode to | ||
| TYPE mode is set to SAP or MONO. | STEREO. See “VCR Setup Menu | ||
|
| Option” on page 18. | ||
Severe hum or noise is | The plugs and jacks are dirty. | Wipe them with a cloth slightly mois- | ||
heard. |
| tened with alcohol. | ||
| The disc is dirty. | Clean the disc. | ||
| The speakers and components are | Connect the speakers and components | ||
| connected poorly. | securely. | ||
| The DVD/VCR Receiver is located too | Move your TV away from the audio | ||
| close to the TV. | components. | ||
Radio stations cannot be | The antenna is positioned or connected | Connect the antenna securely. | ||
tuned in. | poorly. |
|
| |
|
| Adjust the antennas and connect an | ||
|
| external antenna if necessary. | ||
| The signal strength of the stations is too | Tune in the station manually. | ||
| weak (when tuning in with automatic |
|
| |
| tuning). |
|
| |
|
|
| ||
| No stations have been preset or preset | Preset the stations (page 38). | ||
| stations have been cleared (when |
|
| |
| tuning by scanning preset stations). |
|
| |
|
|
| ||
No sound from DIGITAL | DVD/VCR Receiver source is not set to | Select OPTICAL by pressing AUX once. | ||
AUDIO IN (OPTICAL). | DIGITAL AUDIO IN (OPTICAL). |
|
| |
|
|
|
| |
REFERENCE
43