Toshiba D-VR3SB Open Menu, Select Setup, Select Install, Press ❿ or OK button, Scaning

Presetting the Stations Automatically

You do not need to preset the stations if you have already set them automatically (see Plug & Auto Set Up on page 27).

Your DVD Recorder-VCR contains a built-in tuner used to receive television broadcasts.

You must preset the stations received through the tuner. This can be done:

• Plug & Auto Set up (see page 27)

• Automatically

• Manually (see page 30)

1	Open “MENU”
	With the DVD in Stop press the MENU button.
2	Select “Setup”
	Using the ❷buttons, move the selection bar to
	“Setup” then press ❿ or OK to select.
3	Select “Install”
	Using the ❷ buttons, move the selection bar

to “Install”, then press ❿ or OK to select.

Programme

5	Press ❿ or OK button.
	A message appears, indicating that any channels
	already preset on the DVD Recorder-VCR will be
	deleted.
		P	rogramme
				Press [OK] to continue
				[Menu] to exit

6	Press OK to start the auto
	scaning.

• The first frequency band is scanned and the first station found is displayed and stored. And the DVD Recorder-VCR searches for the second station and so on.

• When the automatic scanning procedure has finished, the DVD Recorder-VCR switches automatically to programm 1.

• The number of stations automatically stored by the DVD Recorder-VCR depends on the num- ber of stations that it has found.

Programme

System Setup

4	Select “Auto Setup”
	Move the selection	❷ buttons to “Auto Setup”
	then press ❿ or OK	button to select from the
	following options:

Programme

7	If you wish to cancel the auto scanning before the
	end, press the OK button.

• The time and date are set automatically from the broadcast signal. If the signal is weak or ghosting occurs, the time and date may not be set automatically.

• Once the auto scanning procedure has finished, some stations may have been stored more than once; select the stations with the best reception and delete the ones no longer required.

English - 29