Toshiba D-VR3SB owner manual VCR Setting, About the Change Password, Select System

About the Change Password;

1	Select Change Password using ❷ buttons,
	then press the ❿ or OK button.
	• The ‘Enter the password.’ message will be
	displayed.
2	Enter the 4-digit password using the 0 to 9 but-
	tons on the remote control.
	• The ‘Confirm the password.’ message will be
	displayed.
3	Enter your password again using the 0 to 9 but-
	tons on the remote control.

„ Press the RETURN or ➛ button to return to

VCR Setting

If you want your VHS Video tapes to play automatically when you insert them, turn on Auto Play.

	„ Only tapes that are missing the Record Safety
	Tab will play automatically when inserted.
Note

System

Note

the previous menu. Press the MENU button to exit the menu.

Setup

1 Open “MENU”

With the VCR in play mode, Press the MENU button.

2 Select “Setup”

Using the ❷ buttons, move the selection bar to “Setup” then press ❿ or OK button to select.

3 Select “System”

Use the ❷ buttons to highlight “System” then press the OK button.

Programme

English - 41