Toshiba D-VR3SB owner manual Manually, Select Manual Setup

Presetting the Stations	5	Press the ❷ buttons to select a PR number
		as required then press ❿ or OK button to select.

Manually

Edit

Delete

Swap

If you have already set then automatically, you do not need to preset the stations manually.

System Setup

1	Open “MENU”
	With the DVD in Stop mode, press the MENU
	button.
2	Select “Setup”
	Using the ❷ buttons, move the selection bar
	to “Setup” then press ❿ or OK button to select.
3	Select “Install”
	Using the ❷ buttons, move the selection bar

to “Install”, then press ❿ or OK button to select.

Programme

4	Select “Manual Setup”
	Move the selection bar to “Manual Setup”, using

the ❷ buttons then press ❿ or OK button to select.

: Ch 60

Programme

Press the ❷ button to select Edit.

6 Then press ❿ or OK button to be displayed “Manual Setup” menu.

Manual Setup

PR		01
CH	- - -
Name		- - - -
MFT	- - -			- - -
			Done

7	Press the ➛ ❿ buttons to start scanning the
	channels.
	The frequency band is scanned and the first sta-
	tion found is displayed.
8	Press the ❷ buttons until the NAME is select-
	ed. The station name is set automatically from
	the broadcast signal.
9	To change the programme’s name, press the ❿
	button. The first letter of the name flashes.
		Manual Setup
		PR	01
		CH	5
		Name	A - - -
		MFT	- - -	- - -

Done

30 - English