Variable Search
System
Press the QUICK button to display the search screen in the stop mode. When a program is record- ed, the starting point is given an Index mark for easy location. However, the VHS Index Search System (VISS) cannot recognize index marks made by old VCRs. If the VCR has trouble finding a mark, it is proba- bly because the cassette was recorded on a VCR with- out VISS. If you want to index two programs in a row, set your VCR to stop, then start recording each program.
End search
Use this feature when you want to search for a blank position to record a program on a cassette.
While a cassette is stopped, press the QUICK
1 button.
2 Select “End Search”, and perss the OK button.
The VCR will fast forward, searching for a
Go to [0:00:00] stop
Use this feature when you want to search for the [0:00:00] counter position on a cassete.
Note
blank position, and then automatically stop at that position. If the VCR reaches the end of the tape during end search, the tape will be ejected.
Press the CLEAR button at the point on the tape
1 where you want to set the counter to [0:00:00].
While a cassette is stopped, press the QUICK
2 button.
Select “Go To Zero”, and then press the OK
3 button.
The VCR will rewind or fast forward, search-
Scan and play
Use scan and play when you don’t know exactly where | Playback | |
a program is located on a cassette tape. | ||
- Forward Intro Scan | ||
|
Highlight “Forward Intro Scan”, then press the OK but- ton.
- Reverse Intro Scan
Highlight “Reverse Intro Scan”, then press the OK but- ton.
Note
ing for the [0:00:00] counter position, and then automatically stop at that position.