Toshiba D-VR610KU owner manual Video, Selected item, Refer 1 to 2 on this page and set

GENERAL SETTING

Video

.@/:	ABC	DEF
GHI	JKL	MNO	TRACKING
PQRS	TUV	WXYZ	SAT.LINK
	SPACE		TIMER
			PROG.
	SETUP	DISPLAY	AUDIO
DISC MENU			TOP MENU
	ENTER
CLEAR			RETURN
	INSTANT	1.3x/0.8x	TIME SLIP
	SKIP	PLAY
REV	PLAY		FWD
SKIP	STOP		SKIP
PAUSE		VCR	DVD
DUBBING		REC MODE REC
REPEAT TIMER SET SEARCH			ZOOM

Press [STOP C] if you are playing back a disc.

1Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER].

2Use [K / L] to select “Video”, then press [ENTER].

3Use [K / L] to select a desired item, then press [ENTER].

1 Progressive

2TV Aspect

3 Select Video

Submenu will appear.

4	Refer 1 to 2 on this page and set
	the selected item.
	• For 3 , refer to “SETTINGS FOR THE VIDEO

INPUT“ on page 20.

5When you finish with the setting, press [SETUP] to exit.

94 EN

1 Progressive (Default : OFF)

This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”.

1) Use [K / L] to select “ON“, then press [ENTER].

General Setting
Playback
Display	Progressive
Video	TV Aspect
Recording	Progressive
	Select Video
Clock	ON
	OFF
DivX
HDMI

2) Use [{ / B] to select “Yes“, then press [ENTER].

General Setting

Playback				scan:
Activating progressive
Display				Progressive
Check your	TV has		progressive scan
Video				TV Aspect
and connect	withProgressivecomponent video cable.
Rcording				Select Video
Clock		ON
		OFF
DivX
NOTE :
HDMI If there	is no picture or picture is
Reset All
distorted after selecting “Yes”,

Wait about 15 seconds for auto recovery.

Activate? Yes No

3)Use [K / L] to select “Yes“ within 15 seconds, then press [ENTER].

Your setting will be activated.

Note

•If your TV is compatible with progressive scan (480p), you are recommended to use the HDMI or component video cable (commercially available) to connect this unit to the TV. (Refer to “Method 2” on page 21 or page 22.) If not, use the RCA video cable and set the progressive scan to “OFF”.

•If the Progressive Scan image is distorted, you can cancel Progressive Scan by pressing and holding [SETUP] for more than 3 seconds during DVD playback. The “Progressive” setting will be “OFF”.

•When selecting “No” or not pressing any buttons on the unit or remote control within 15 seconds at step 3, progressive scan remains to be “OFF” (interlace scan).

2 TV Aspect (Default: 4:3 Letter Box)

You can select the TV aspect ratio to match the formats of what you are playing back with the unit and your TV screen (4:3 standard or 16:9 widescreen TV).

Use [K / L] to select a desired option, then press [ENTER].

General Setting
Playback
Display	Progressive
Video	TV Aspect TV Aspect
Recording	Select Video
Clock	4:3 Letter Box
	4:3 Pan & Scan
DivX
	16:9 Wide
HDMI
Reset All

If you have a standard TV:

Select “4:3 Letter Box”, so that black bars appear on the top and bottom of the TV screen when playing back a wide-screen picture. Select “4:3 Pan & Scan” for a full height picture with both sides trimmed when playing back wide-screen picture.

If you have a widescreen TV:

Select “16:9 Wide”.

E9KGAUD_D-VR610KU_EN.indd 94

2007/12/18 17:11:28