Recording (VCR)
One-touch Timer Recording (OTR)
VCR DVD
The | CH +/– |
convenient way to make a timed recording.
STOP
REC/OTR
SP/SLP
One-touch Timer Recording (OTR)
Preparation:
•Turn ON the TV and select to the corresponding video input.
•Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.)
Example:
1 Load a cassette tape with the erase prevention tab intact.
The VCR will automatically turn on.
2 Press SP/SLP to select the desired tape speed SP or SLP.
The tape counter and “SP” or “SLP” will appear on the screen for about 4 seconds.
Set “TV” or “CABLE” option to the | ||
3 appropriate position 27 . |
| |
|
|
|
| TV | - VHF/UHF channels |
| CABLE | - Cable TV channels |
|
|
|
36
4 Press Direct channel selection buttons
CH +/– to select the channel to be recorded.
5 Press REC/OTR. Recording begins. Press the button again to stop recording after 30 minutes. Each additional press of REC/OTR will increase recording time as shown in the chart below, up to a maximum of 6 hours.
Press | Recording time | Press | Recording time |
once | NORMAL REC | 6 times | 3:00 |
twice | 0:30 | 7 times | 4:00 |
3 times | 1:00 | 8 times | 5:00 |
4 times | 1:30 | 9 times | 6:00 |
5 times | 2:00 | 10 times | NORMAL REC |
The OTR and recording time will
appear on the screen for about 4 seconds, then change to “ ”.
To cancel OTR
Press STOP or turn off the power.
“ ” will appear on the screen for about 4 seconds.
Note:
If you wish to watch the DVD playback during OTR or standard recording, press VCR DVD selector to change to DVD mode and perform the DVD playback 42 .
36 | 1/12/06, 17:05 |