Description
Installing
Batteries
in the
Remote Control
1. Press the tab and lift up the battery | 2. Insert new batteries and ensure | 3. Slide and Close the battery cover. | |||
cover | that the polarity is correct when |
|
|
|
|
| installing. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Using
the
Remote
controller
The effective operating range of the remote control 16 feet, and 30° left or right of the from the DVDIR
receiver.
Battery
Handling
Precaution
● Incorrect use of the battery cause leakage or corrosion.
●Ensure that polarities are correct when inserting batteries.
●Do not expose to impose heat or fire. Do not disassemble or
●Ensure that exhausted batteries are not inserted into the remote control.
●Do not use different types of batteries together. Do not use old batteries together with new ones.
●If you don't use the remote controller for a long time, remove the batteries to avoid possible damage from battery corrosion.
●Replace the batteries with new ones if the remote controller does not operate or the operating distance comes to be short.
Remote
controller
handling
precaution
●Do not leave a remote control in a hot or damp place.
●Do not drop place a heavy object on the remote control.
●Do not disassemble remote control.
●Do not get wet.
Connection
Connecting
to
a
TV/Monitor
Reference : You can connect auxiliary devices in this port, such as VCR.
Video | Audio Cable | |||
Cable | Cable |
|
| |
|
|
|
|
|
1.Connect the audio cables between the AUDIO OUT (L/R) jacks on the back of your DVD player and the corresponding Audio Input jacks on your TV/Monitor.
2.Connect the video cable between the VIDEO OUT jack on the back of your DVD player and the corresponding Video Input jack on your TV/Monitor. (If you have
Caution �When you connect the DVD player to your TV/Monitor, be sure to turn off the power and unplug both
units before making any connection.
�Connet the DVD player to your TV/Monitor directly.
�If you connect the DVD player to a VCR, the playback picture will be distorted because DVD video discs are copy protected.
Warning �Do not set the Digital Audio Output of this DVD player to "PCM" unless you are connecting the
Digital Audio jack of this DVD player to an AV decoder that has Dolby Digital decoding function.
16 | 17 |