ADIC SNMS 2.3 manual Installing Client Software, Using FTP

SNMS

Step 4 Choose the platform that corresponds to the operating system on your client machine and click Next.

Step 5 Continue through the Download Client Software wizard until you have completed downloading the software for the platform you selected.

Step 6 Go to the Installing Client Software section of this document for instructions on installing the software for your operating system.

Using FTP

Use the following procedure to download client software if you do not have Web browser access.

Step 1 ftp <StorNext server>

Step 2 ftp> cd /<usr>/cvfs/CLIENTS

Step 3 ftp> bin

Step 4 ftp> get <platform.tar>

Step 5 Go to the Installing Client Software section of this document for instructions on installing the software for your operating system.

Installing Client Software

The SNMS client software allows the mounting of one or more StorNext File Systems and communicates with your server. Once you have downloaded the SNMS client software from the server, you can install the software on your client machines. You cannot perform these installations through the GUI; you must use command-driven procedures that are specific for your operating system.

The following procedures provide instructions for installing the SNMS client software in a Windows, SGI IRIX, Sun Solaris, Linux, or IBM AIX operating system.

NOTE	If you used the optional pre-installation configuration, you must first perform the
	steps for adding a user account and a group account on each machine that you set
	up as a client. (Refer to the Using the Optional Pre-Installation Configuration
	section in this document to perform these steps.)

2-22 6-00360-04 Rev A