ADIC SNMS 2.3 manual Installing on Linux, File system name mount point cvfs auto verbose=yes

SNMS

mkdir -p <mount point>

chmod 777 <mount point>

Step 5 Add the following line to the /etc/vfstab file to enable automount after reboot.

<file system name> - <mount point> cvfs - auto verbose=yes

The file system name is the name that you created when you configured the SNMS software using the ICW Add File System wizard. (Refer to the Adding File Systems section of this document for more information.)

NOTE	To mount a file system manually, type the following at the command prompt.
	mount -F cvfs <file system name> <mount point>

Installing on Linux

Use the following procedure to install the SNMS client software in a Linux operating system.

Step 1 Log on as root.

This allows you to perform the installation without having permission problems.

Step 2 Install the client software.

tar xvf <filename>

rpm -ivh <client package name>

Step 3 Enable the chkconfig levels to start automatically on reboot.

chkconfig --level 3456 cvfs on

Step 4 Make sure the /<usr>/cvfs/config/fsnameservers file contains the name of your server machine.

Step 5 Create the mount points for the file systems.

mkdir -p <mount point>

chmod 777 <mount point>

Installing SNMS 2-25