ADIC SNMS 2.3 manual Using the Initial Configuration Wizard

SNMS

The Initial Configuration Wizard (ICW) screen (see Figure 2-6) appears and will guide you through the complete configuration of the StorNext software.

You should first complete the ICW for licensing and configuring your CAUTION software before you use the StorNext Management Suite GUI. If you work on the GUI before completing the ICW, file system failures will

occur.

Using the Initial Configuration Wizard

The Initial Configuration Wizard (ICW) guides you step-by-step through the process of configuring the SNMS software. The first page of the ICW lists seven configuration steps that must be completed in sequence. Text for the active step appears in a different color. It is followed by the word Completed when the step is done. Until all seven configuration steps are completed, the ICW opens every time the StorNext Management Suite GUI is refreshed.

Each configuration step also contains its own wizard that leads you through a set of screens for that step. You must continue through all the screens for a configuration step before the step is completed. For example, you must complete all the screens associated with Step 1: Enter License before you can continue to Step 2: Add File System. When you are finished with a step, click Done to continue to the next step. After a step is completed, you cannot return to the previous step.

2-8 6-00360-04 Rev A