UNIT OPERATION
Turning the Unit On
The system is in the standby condition (STANDBY indicator lights) when the AC power cord is connected.
1.Press the 
STD.BY/ON button on the unit or press the STANDBY/ON button on the remote control to turn ON the unit.
2.Press the FUNCTION button to select the desired feature. The corresponding feature mode will appear on unit's fluorescent display. If DVD is selected, the DVD logo
3.Press the 
STD.BY/ON button on the unit or press the STANDBY/ON button on the remote control to return the unit to standby mode.
Notes:
Whenever no disc or disc stop for 30 minutes, the system will be turned to standby mode automatically.
The Standby indicator will be turned on while the unit is at standby mode.
SOUND/TONE ADJUSTMENT
Adjust the Sound Tone
Press the SOUND button until a desired sound effect is displayed. Press 
or 
CURSOR button to adjust the sound effect.
Using Headphones
Turn down the volume before connecting headphones to the unit, then adjust the volume to your desired level. 
When headphones are connected to the unit, the speakers will be disabled.
Note:
Avoid listening to sound at high levels for prolonged periods of time. This may be harmful to you and may cause loss of hearing.
Dolby Digital (for DVD)
Headphones
(3.5mm
diameter plug)
Top of unit
Dolby Digital is a sound system developed by Dolby Laboratories Inc. that gives movie theatre ambience to audio output when the unit is connected to a Dolby Digital 5.1 channel processor or amplifier (through the "digital out" audio jack).
This unit automatically recognizes DVDs that have been recorded with Dolby Digital. Not all Dolby Digital sources are recorded with 6 channels.
Some sources marked Dolby Digital may be recorded in Dolby Surround, a 2 channel system. Look for this logo on your unit.
Manufactured under license from Dolby Laboratories.
'Dolby' and 
the
15