Audiovox MVS6950 manual Playing a Disc, Pausing playback still mode, Stopping playback

Page 17

DVD CD

Basic playback

PLAYING A DISC

This owner’s manual explains the basic instructions of this unit. Some DVD discs are produced in a manner that allows specific or limited operation during playback. As such, the unit may not respond to all operating commands. This is not a defect in the unit. Refer to the instruction notes of discs.

" " may appear on the screen during operation. A " " means that the desired operation is not permitted by the unit or disc.

Playing a Disc

1.Press the STD.BY/ON button on the unit or press the STANDBY/ON button on the remote control to turn on the unit.

2.Press the FUNCTION button to select the DVD mode.

See CUSTOMIZING THE FUNCTION SETTINGS (page 27 to 29) before proceeding to step 3.

3.Open the disc door.

4.Hold the disc by its sides and carefully make it fit onto the central support of compartment with the printed side facing towards you until you hear a "click".

5.Close the disc door gently.

It takes a short while for your unit to load the disc. After loading, for some discs, the unit will automatically start playing most discs.

6.If the disc does not start automatically, press the PLAY button.

NOTE: With its printed side facing outward, gently push the disc onto the center pivot until it clicks and is held in place securely.

Pausing playback (still mode)

Press the PAUSE button to hold still of a playing disc. To resume normal playback, press the PLAY button.

Stopping playback

Press the STOP button at the location where you want to interrupt playback. To resume playback at the position where the disc was stopped, press the PLAY button again.

If you press the STOP button twice, the unit’s memory will be cleared and pressing the PLAY button will reset the disc to the beginning.

To skip to a different track

Press the PREV button on the remote once to skip to the start of the previous track.

Press the NEXT button on the remote to skip to the next track.

For audio CD disc, use the number buttons (remote control only) to jump straight to the desired track number.

16

(continued on next page)

Image 17
Contents Page On Placement Safety PrecautionsOn AC Voltage On SafetyFCC Information On CondensationImportant Safety Instructions Table of Contents Region Management Information Disc FormatsDisc Function or Operation that is Not Available Icons Used on DVDsRemote Control AccessoriesControl Reference Guide Remote ControlPlay Preset button Start playback SettingsZoom TV Mode button STANDBY/ON buttonUnit Front , Top, Left & Right Panel Unit Rear Panel Display Information Region Local Number Error IndicatorDisplay Power cord connection FM antenna wire connectionConnections Speaker connectionRear of unit Connecting a TVVideo Equipment Watching Video EquipmentAudio Source Connection Using External Audio EquipmentUnit Operation SOUND/TONE AdjustmentPlaying a Disc Pausing playback still modePlaying a Disc Stopping playbackSkip Forward /Reverse Fast Forward/Fast ReverseSlow-motion play Subtitle selection Angle selectionAudio selection Special Functions Locating a specific title / chapter / track Locating a specific titleLocating a specific time Programmable memory CD / DVD Programmable MemoryTitle / Chapter programmed playback Programmable memory Track programmed playbackRepeat Playback Playing a MP3 file disc 1. Open the disc door Playing MP3 and Picture File DiscTo pause playback To stop playbackPlaying a MP3 / Picture file disc Playing a Picture file discRadio Operation Video setting Customizing the Function SettingsLanguage setting Explanation of Aspect Ratios Pan Scan NormalRating setting Symptom Cause and Remedy Trouble Shooting GuideCleaning Disc MaintenanceCleaning the unit Important Note