TROUBLE SHOOTING GUIDE
SYMPTOM | CAUSE (AND REMEDY) |
No power. | Check that the AC power cord is connected. |
The remote does not function. | Remove any obstacles between the remote and the unit. |
| Use the remote near the unit. |
| Point the remote at the remote sensor on the unit. |
| Replace all the batteries in the remote with new ones. |
No sound or only a very low- level sound is heard.
Check that the speakers and equipment are connected securely. Make sure that you've selected DVD mode.
The system is in pause mode or in 
PLAY button to return to normal play mode.
Fast forward or fast reverse is performed. Press the 
PLAY button to return to normal play mode.
Make sure that AUDIO / VIDEO output connections are correct. Adjust the speakers volume.
The DTS DVD disc cannot be decoded to have speaker output. This unit is too hot, shut off the unit for 30 minutes to cool down.
No picture
The picture is not clear.
Severe hum or noise is heard.
The region number of the disc does not match the region number of this unit.
The function is not set to DVD mode.
Clean the disc.
The disc is scratched.
Check that the speakers and equipment are connected securely. The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.
Clean the disc.
Vibrations from the speakers are affecting the unit.
The disc does not play.
There is no disc inside ("No Disc" appears on the screen). Insert the disc correctly with the playback side facing inward. Clean the disc.
A
Condensation may have formed inside the unit due to a sudden change in temperature. Wait about an hour for it to clear and try again.
30