RADIO OPERATION
Tuning into a station manually
1.Press FUNCTION button until the frequency
band appears on the display.
2. Press the BAND button to select the desired band.
3. Press the 
TUNING 
button to tune in the desired station.
FM Stereo
Press the FM MODE button on the remote
until " 
" appears on the display.
Weak FM stations
Press the FM MODE button on the remote
until the " 
" word appears on the display. Background noise will be reduced but the signal reproduced will be mono. To restore stereo reception, press the FM MODE button on the remote to select STEREO.
To search for a station automatically
Hold down the 
TUNING 
buttons on the remote or 
SKIP 
buttons on the front panel for 1 to 2 seconds, and a station is searched for automatically. After tuning in a station, the search stops.
The search may not stop at a station with a very weak signal.
Presetting stations
You can tune into a stored station directly by entering the preset number. 20 stations on FM band can be preset.
20 stations on AM(MW) band can be preset.
1.Press FUNCTION button until the frequency band appears on the display.
2.Press the BAND button to select the desired band.
3.Press the 
PLAY (PRESET) button or number button to select the preset number.
4.Use the 
TUNING 
button to find your desired station.
5.Press the MEMORY button twice on the remote.
6.Repeat steps
Tuning into a preset station
1.Press FUNCTION button until the frequency band appears on the display.
2.Press the BAND button to select the desired band.
Press the 
PLAY (PRESET) button to select the presetted station or use the numbered buttons to enter the number to select the presetted station.
Example: To select preset number 15, press the +10 and 5 buttons. To select preset number 10, press the +10 and 0 buttons.
26 | (continued on next page) |