Saba 31-5023 Downmix setting, Using the test tone mode, Center delay setting, Rear delay setting

Page 17

Basic setup

DOWNMIX setting

This setting will affect the audio output signal when playing DVD discs recorded with surround multi-channel audio. To select one of the following Downmix settings, use the setup menu, select speaker settings to access the DOWNMIX menu

ξLT/RT: For use with an external amplifier or television

with a Dolby Pro Logic decoder.

ξ LO/RO: For use with a stereo amplifier/receiver or television with conventional 2-channel stereo.

Notes:

ξThe default setting is LT/RT.

ξIf you are not getting any output from the speakers connected to this system, change the setting to LO/RO.

Using the test tone mode

We recommend that you use the test tone mode after you have set up and connected your speakers to check the balance level and connections of each speaker.

Use the setup menu to select speaker setup, to arrive at the following screen:

g this test, it is common for the

Turn this function to ON to test each speaker individually with a two second pink sound. The location of the speaker will be displayed on the television screen and the front display panel, as each speaker is being tested.

NOTE: When performing this test, it is common for the volume of the pink noise from the subwoofer to be lower than the volume of the pink noise from the center, front and rear speakers.

Center delay setting

The center delay can be adjusted in Dolby Digital mode. To change this setting, use the setup menu, select speaker setup to access the following screen:

Select the desired delay time of the center speaker as follows: OFF, 3MS, 6MS, 9MS, 12MS, 15MS.

NOTE: The default setting is 15ms. We recommend that you change it to 9ms.

Rear delay setting

The rear delay can be adjusted in Dolby Digital mode. To change this setting, use the setup menu, select speaker setup to access the following screen:

Select the desired delay time of the surround speaker as follows: OFF, 3MS, 6MS, 9MS, 12MS, 15MS.

NOTE: The default setting is 15ms. We recommend that you change it to 9ms.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Page RadioShack Corporation. All Rights Reserved Location Important safty informationIntroduction ContentsUnpacking Getting startedDiscs Disc handling Disc terminologyTitles and chapters DVD-video discs Tracks audio and video CD discsFuntion overview Audio Audio OUT L/RCoaxial OUT Video OUTSleep SurrProg Repeat15. / PLAY/PAUSE SetupSLOW/MEM SelectSpeaker system connection ConnectionsTo avoid short-circuiting the speakers Examples of poor speaker connectionsAntenna connections TV and optional component connections Setting up the surround sound system Basic setupPosition HeightSelecting the listening mode Initial settingsUsing the setup menu Using the test tone mode Downmix settingCenter delay setting Rear delay settingSelecting the audio language Selecting the dynamic rangeSelecting the disc menu language Selecting the parental control levelChanging the parental control password When playing CVD, Svcd or VCD discs When playing DVD discsPlayback functions To watch a DVD discRepeat playback When playing CVD, SVCD, CD and MP3 discs with no foldersProgram playback Viewing disc information When playing VCD discsWhen playing Svcd , VCD or CD discs When playing an MP3 encoded CD disc Angle selection Special functionsPicture zoom Selecting the subtitle language Setting Pr/Pb/Y mode Other functions Listening to an external source Using the sleep timer Limited Warranty Trouble Shooting Page Page Page DVD Section SpecificationsTuner Section Amplifier SectionSurround SpeakerFront & Center
Top Page Image Contents