Playback functions, To watch a DVD disc

Playback functions

IMPORTANT

Please note that some DVD movie discs may not have all the features described in this chapter. For example, older movies may not allow you to select multiple camera angles. Refer to the instructions or liner notes that are included with each disc to determine what features and operations are available on that particular disc.

POWER

OPEN/CLOSE

SOURCE PLAY/PAUSE

To watch a DVD disc:

1.Turn your television set’s power on, and set the channel to the video input.

2.Press the POWER button on the front panel to turn on the main power of this system. The front panel display lights up, and the DVD logo screen appears on the television screen.

3.If the system is not in the DVD player mode, press the SOURCE button on the front panel or remote control to select it.

4.Press the OPEN/CLOSE button, and place a disc on the disc tray.

NOTE: Load the disc placing the label side face up, and using the disc tray as a guide for proper alignment. When playing a double-sided DVD disc, load it with the desired playing side face down.

5. Press the PLAY/PAUSE button to start playback.

Slow-motion playback

TUNE +/-

PLAY/PAUSE

SLOW/MEM

To view playback in slow-motion, press the SLOW/MEM button on the remote control unit during playback.

When playing DVD discs:

Press the SLOW/MEM button repeatedly to select the slow motion speed and direction as follows:

SLOW 1/2 Ö	SLOW ¼	Ö SLOW 1/8	Ö SLOW

1/2 Ö SLOW 1/4	Ö SLOW 1/8 Ö NORMAL.

When playing CVD, SVCD or VCD discs:

Press the SLOW/MEM button repeatedly to select the slow motion speed as follows:

SLOW 1/1 Ö	SLOW 1/2 Ö	SLOW1/3 Ö
NORMAL.

Notes

ξ SLOW: Slow forward playback.

ξ SLOW: Slow reverse playback.

ξThe smaller the number, the slower the speed.

ξThis function is not available for CD or MP3 discs.

ξOn some discs, the slow-motion playback function is not available.