Funtion overview
Front panel
1 | 2 |
3 | 4 | 5 | 6 | 7 | 8 | 9 |
1. POWER
To turn the unit on or off. When the system is turned on, the unit will go to the mode it was set in before the power was turned off.
2. OPEN/CLOSE
To open/close the disc tray.
3. SOURCE
Select source: DVD, FM, AM or AUX (auxiliary component).
4. SELECT
6. STOP
Stops playback of a disc and clears the stored program.
7.SKIP/TUNING
In tuner mode, press to tune to a higher or lower radio frequency. For automatic tuning, press and hold it for more than 2 seconds.
In DVD mode, press to play a disc in fast forward or reverse modes.
8. VOLUME +/-
Increase or decrease the master volume level.
To select the audio channel to view or adjust its level. | 9. PHONES |
| Use to connect the headphones. |
5. PLAY/PAUSE / |
|
To start or temporarily stop playback. |
|
8