Onkyo DV-SP800 instruction manual Setting the TV System Other than US and Canada models

Page 20

Connecting the Power/Turning on the DVD Player

Before connecting

The DV-SP800 is shipped with the main power (POWER) switch in the on position (_ ON). When the power cord is plugged in for the first time, the DV-SP800 will automatically enter the standby state and the STANDBY indicator will light (same condition after step 2 below).

Make sure that all the connections on pages 15-19 are complete (the connection to a TV is required).

1

Plug the supplied power cord into

the AC INLET and then into the

power outlet on the wall.

• Do not use a power cord other than the one supplied with the DV-SP800. The power cord supplied is designed for use with the DV-SP800 and should not be used with any other device.

• Never have the power cord disconnected from the DV-SP800 while the other end is plugged into the wall outlet. Doing so may cause an electric shock. Always connect by plugging into the wall outlet last and disconnect by unplugging from the wall outlet first.

AC INLET

To the mains

2

Press POWER to switch on the main

power.

The DVD Player enters standby mode.

The STANDBY indicator lights up.

The buttons on the remote controller do not operate if the POWER switch is set to OFF.

To switch off the main power, press POWER again.

3

 

Press STANDBY/ON on the DVD

 

Player or ON on the remote

 

 

controller.

 

 

The DVD Player turns on and the STANDBY indicator turns off.

To put the DVD Player in the standby mode, press STANDBY/ON on the DVD Player, or STANDBY on the remote controller. Be sure to set the volume to minimum before putting the DVD Player in the standby mode for the next use to avoid sudden loud sound reproduction.

While the STANDBY indicator lights up, the DVD Player can receive signals from the remote controller. However, if you press POWER on the DVD Player to switch off the main power, the remote controller cannot be used to turn on the DVD Player.

Setting the STANDBY button to standby does not shut off the power completely.

Setting the TV System (Other than US and Canada models)

The default setting of this player is AUTO, and unless you notice that the picture is distorted when playing some discs, you should leave it set to AUTO.

If you experience picture distortion with some discs, set the TV system to match your country or region’s system. Doing this, however, may restrict the kinds of disc you can watch. The table below shows what kinds of disc are compatible with each setting (AUTO, PAL and NTSC).

Disc

 

 

 

 

Output format

 

 

 

 

 

 

 

 

 

 

Type

 

Format

 

Position of TV SYSTEM mode

 

 

 

 

NTSC

PAL

AUTO

 

 

 

 

 

 

 

 

 

DVD

 

NTSC

NTSC

MOD. PAL

NTSC

 

 

 

PAL

 

 

 

PAL

PAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Video CD

 

NTSC

NTSC

MOD. PAL

NTSC

 

 

 

 

 

 

 

 

 

 

 

 

PAL

NTSC

PAL

PAL

 

 

 

 

 

 

 

 

 

CD, No disc

 

 

NTSC

PAL

NTSC or PAL

1Switch the player into standby.

2Hold down ¢ then press STANDBY/ON until the display indicates the new setting to switch the TV system.

The TV system changes as follows:

AUTO =

NTSC

NTSC =

PAL

PAL =

AUTO

Note that you have to switch the player into standby before each change.

About MOD. (Modulation) PAL

SHRINK

Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch vertical amplitude, resulting in a display without vertical shrinkage.

If your PAL TV does not have a V-Hold control, you may not be able to view NTSC disc because the picture may roll. If the TV has a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at the top and bottom of the screen. This is not a malfunction; it is caused by the NTSC = PAL conversion.

20

Image 20
Contents DV-SP800 Table of Contents Important Safeguards AvisPrecautions For British modelFor Canadian model For U.S. modelPower Regional Restriction Codes Region NumberAbout This Manual Recording CopyrightStructure of the Disc Content Getting StartedPlayable Discs About Video CDsCleaning Discs MP3 compatibility informationHandling Discs Storing DiscsSupplied Accessories Features/Supplied AccessoriesFeatures Setting the Voltage Selector Worldwide models only Using the Remote ControllerBefore You Start Inserting the BatteriesIndex to Parts and Controls Front panelDisplay Index to Parts and Controls Rear panelRemote controller Operation buttons + Setup button Setup buttonSurround Mode button Subttl buttonConnecting to a TV ConnectingUsing the supplied audio/video connection cable Before connectingMaking S-video connections Connecting to a TVMaking component video connections AV Connector 1 jack Connecting to a TV European modelsConnecting to a TV Using the Scart Cable European models Optical fiber connection cable Making a digital connection with the amplifierAudio connection cables Making discrete 5.1 channel Analog Output connections Making discrete 2 channel Analog Output connectionsAn amplifier with Cable To z jackSetting the TV System Other than US and Canada models Setting Up the Player Using the Setup NavigatorWhen setting up for the first time To exit the Setup NavigatorSetting Up the Player Setting the OSD Language On-Screen Display LanguageSetting the TV screen size Setting the type of analog audio connectionsTo change other player settings in the Setup screen menus Setting compatibility with 96 kHz outputConfirming the settings Various sound formats and sound effects Dolby Digital SurroundDTS Surround MPEG2When an operation is prohibited Basic PlaybackPlaying SACDs, DVDs, Video CDs, CDs and MP3s MP3 marks in the pages related to disc operationGetting Started Using Your DVD Player When a Menu Screen is DisplayedTo Open or Return to the DVD or Video CD Menu Screen To navigate a menu screenPausing Playback Switching the Playback SpeedChapter Track Skip Forward/Skip Back Forward and Reverse ScanningResuming Playback from where you stopped Stopping Playback and Switching Power OffPress 7 once Remove the discStill Frame/Slow Play Advanced PlaybackViewing a still frame Viewing slow playbackSearch using the number buttons When performing a time searchTo perform a direct title or chapter/track Playing bonus groups of DVD-AudioUsing the MP3 Navigator Navigate using the following controlsRepeating a Specific Segment Repeat PlayRepeating a Title, Group, Folder, Chapter or Track Random Play Playing in Random OrderTo change titles, chapters, or tracks during random play To stop random playPlaying in a Favorite Order Programming DVDsProgramming MP3s Press Program to enterMP3 Program screen Use the number buttons to enter a three-digit folder numberAdditional programming options Playing in a Favorite OrderProgramming Video CDs, CDs, SACDs To add a title/group/chapter/track to a program To save a program in memoryTo erase a program saved in memory Press and hold Program for about 2 secondsSelecting the Camera Angle Viewing from a Desired Camera Angle Multi-AngleTo check whether or not a disc is recorded with angles Press Angle during playbackChanging Audio Type Changing the Audio Language Multi-Language FunctionSelecting a Subtitle Language Multi-Language Subtitles Press Last M while in the stop mode To clear the Last Memory locationPress Last M during play Load a disc that has a Last Memory point memorizedErasing the recorded contents Memorizing Settings for DVDsWhen a disc that has memorized settings is loaded Turning Off the Video Signal Output Switching the video signal offPress Video Circuit OFF on DVD Player repeatedlyListening through Headphones Listening through HeadphonesAdjusting the phones level Phones levelViewing Disc Information Viewing Disc Information during while a disc is playingUsing Dimmer function Viewing Disc Information during while a disc is stoppedAdjusting Audio and Video Settings Using the Setup Screen MenusChanging to the Setup Screen Expert Menu Mode Settings Expert Basic Factory settingReturn Setup VOL EnterAdjusting Audio and Video Settings Adjusting the Dynamic Range of the Audio SoundtrackSetting the Audio 1 Options Dolby Digital OutDTS Out Linear PCM OutMpeg Out Digital Out ExpertSetting the Audio 2 Options Speaker SettingSacd Playback Expert Audio OutGain Settings Expert Settings Fix Factory setting VariableOff Factory setting SettingsSetting the TV Screen Size Settings 43 Letter Box Pan & ScanWide Factory setting Differences in screen sizes and DVD formatsSetting the Video 1 Options Switching the S-Video Output ExpertComponent Video Turning the Screen Saver On and Off ExpertAdjusting the Video Quality Selecting a preprogrammed settingProfessional Memory 1, Memory 2, and MemoryPress Display Use the cursor button ∞ to select Video Setup and pressPureCinema DVD-Video only Setting the Video 2 Options Setting the Position of the On-screen Display ExpertTurning the angle indicator on and off Expert Changing the Background of the ScreenSetting the Language Options Setting the On-screen Display OSD LanguageSelecting an audio language preference ChineseSettings w/ Subtitle Language Factory setting Selecting a subtitle language preferenceSelecting a DVD menu language preference English French German Italian SpanishWhen Other is selected Settings With Audio Selected Subtitle Factory settingForcing subtitles to be displayed Expert Off Assist SubtitleLanguage Code List Setting the Parental Lock Level Entering the PasswordPress Enter to set the password LevelSetting the Parental Lock Level Changing the PasswordSetting the Country Code Press Enter to set the new levelCountry Code List Other SettingsAuto Disc Menu Expert Group Playback ExpertMemorizing Settings Function Memory Recalling Memorized SettingsResetting the Player to System Settings To clear the Function MemoryProgramming procedure Other remote control unitOthers SEND/LEARNOther remote control unit that Corresponds to the command youLearn indicator flashes twice to Indicate that the command hasErasing the programmed command from one button Erasing all the commands programmed under a Mode buttonErasing Registered codes Register the Codes of Other Units Remote ControllersOperate other units with the registered codes Preset Settings Brand Remote CodeRegister the Codes of Other Units Remote Controllers VCRTroubleshooting TroubleshootingSymptoms Causes Remedies Pages DVD PlayerTroubleshooting DVD Player Remote Controller Symptoms Causes Remedies Pages Specifications GeneralDVD Player OutputsMemo Onkyo China Limited Onkyo U.S.A. CorporationOnkyo Europe Electronics GmbH
Related manuals
Manual 76 pages 56.55 Kb