Onkyo DV-CP802 instruction manual Remote Controller

Getting to Know the DV-CP802—Continued

GPower cord (21)

Connect the power cord to a suitable wall outlet.

HOPTICAL DIGITAL AUDIO OUTPUT (20)

This optical digital audio output can be connected to an optical digital audio input on a hi-fi amp, AV receiver, or surround sound decoder (Dolby Digital, DTS). The Digital Out/Digital1 setting on page 50 is used to configure this output.

ICOAXIAL DIGITAL AUDIO OUTPUT (20)

This coaxial digital audio output can be connected to a coaxial digital audio input on a hi-fi amp, AV receiver, or surround sound decoder (Dolby Digital, DTS). The Digital Out/Digital2 setting on page 51 is used to configure this output.

Remote Controller

1				N
2	ON STANDBY		OPEN/	O
			CLOSE
3	SEARCH	LAST M	MEMORY CHAIN MODE	P
4			REPEAT
	1	2	3	Q
			A-B	R
5	4	5	6
			RANDOM	S
	7	8	9
			DISPLAY	TU
	+10	0	CLEAR
	TOP MENU		MENU
6				V
		ENTER		W
				X
	RETURN		SETUP
7
				Y
8	AUDIO	ANGLE SUBTITLE ZOOM		Z
9
				a b c
J				d
K
	DISC 1	DISC 2	DISC 3 STEP/SLOW	e
L	DISC 4	DISC 5	DISC 6	f

DISC SKIP PROGRESSIVE	DIMMER	g
M
		h
RC-542DV

J REMOTE CONTROL (20)

These (Remote Interactive) connectors can be

connected to the connectors on your other Onkyo AV components for interactive control.

To use you must make an analog audio connec- tion (RCA) between the DV-CP802 and your Onkyo AV receiver, even if they are connected dig- itally.

For detailed information, refer to the pages in parenthe- sis.

ASTANDBY button (21)

This button is used to set the DV-CP802 to Standby.

BON button (21)

This button is used to turn on the DV-CP802. Don’t turn on the DV-CP802 until you’ve com- pleted and double checked all of your connections (page 17).

CSEARCH button (27, 30, 35)

This button is used to search for titles, chapters, groups, tracks, and specific points in time.

DLAST M button (42)

This button is used with the Last Memory function.

ENumber buttons (27, 30, 35)

These buttons are used to enter title, chapter, group, and track numbers and to enter times for locating specific points in time.

To enter a single-digit number, simply press the cor- responding button. To enter a double-digit number, enter the numbers in order from left-to-right (e.g., to enter 14, press [1] then [4].

The [+10] button is used to enter multiples of ten (i.e., 10, 20, 30, and so on). For example, to enter the number 25, press the [+10] button twice fol- lowed by the [5] button.

FTOP MENU button (26)

This button is used to select the top menu.

GRETURN button (48)

This button is used to return to the previously dis- played onscreen setup menu.

14