Onkyo DV-CP802 instruction manual Setting Levels With the Test Tone, AV Synchronization

Page 54

Conﬁguring the DV-CP802—Continued

3When you’ve ﬁnished, press the

[SETUP] button to exit setup, or

Remote controller

3When you’ve ﬁnished, press the

[SETUP] button to exit setup, or

Remote controller

SETUP

Note:

press the Left [] button repeat- edly to go back to the main setup menu.

SETUP

press the Left [] button repeat- edly to go back to the main setup menu.

•The Speaker Distance settings have no effect on SACD (multichannel area and 2-channel area) and 196 kHz/176.4 kHz DVD-Audio.

Setting Levels With the Test Tone

1	Use the Up and Down [ ]/[ ]
Remote controller	buttons to select Test Tone, and
Remote controller	then press the [ENTER] button.
	The Test Tone settings appear onscreen.
ENTER

AV Synchronization

When using progressive scanning you may ﬁnd that the picture and sound are out of sync. With this setting you can delay the audio to correct this. There are three setup memories (1, 2, 3) for storing settings for up to three components. Memories 2 and 3 are already set at 50 ms, which is a good staring point when compensating for the video delay caused by a typical projector with a built-in scaler.

ON STANDBY

2

Remote controller

ENTER

Use the Up and Down [ ]/[ ] buttons to select a speaker, press the [ENTER] button, use the Left and Right []/[ ] but- tons to adjust the level, and then press [ENTER] again.

Repeat for each speaker.

A test tone is output by each speaker as it is selected.

Speaker levels can be adjusted in 1 dB steps.

	Speaker	Range	Default

	Front Left

	Center

	Front Right	–12 dB to
			0 dB
	Surround
		0 dB

	Right
	Right

	Surround Left

	Subwoofer

You cannot set the level of speakers that are set to Off.

			OPEN/
			CLOSE
	SEARCH	LAST M MEMORY CHAIN MODE
			REPEAT
	1	2	3
			A-B
	4	5	6
			RANDOM
	7	8	9
			DISPLAY
	+10	0	CLEAR
	TOP MENU		MENU
ENTER
/		ENTER
/	RETURN		SETUP
			SETUP
	AUDIO	ANGLE SUBTITLE
	DISC 1	DISC 2	DISC 3 STEP/SLOW
	DISC 4	DISC 5	DISC 6

DISC SKIP PROGRESSIVE DIMMER

RC-521DV

Selecting the AV Synchronization

1	Use the Up and Down [ ]/[ ]
Remote controller	buttons to select setup 1, 2, or 3,
	and then press the [ENTER] or
	Right [ ] button.
ENTER	The parameters appear onscreen.

54

Image 54

Contents DV-CP802 Contents Important Safety Instructions AvisPrecautions For models having a power cord with a polarized plugSur les modèles dont la ﬁche est polarisée Precautions Supplied Accessories DV-CP802 FeaturesIntroduction Introduction Disc Notes Disc Content Organization IntroductionMP3 & Jpeg Compatibility Storing Discs TerminologyHandling Discs CopyrightMPEG2 Moving Picture Experts Group Jpeg Joint Photographic Experts GroupCompressed digital video format used for VCDs Vlsc Vector Linear Shaping CircuitryGetting to Know the DV-CP802 Front PanelGetting to Know the DV-CP802 Display Getting to Know the DV-CP802 Rear PanelRemote Controller Angle button Setup buttonAudio button Fast Forward buttonUsing the Remote Controller Before Using the DV-CP802Installing the Remote’s Batteries Open the battery compartment, as shownBefore Making Any Connections Connecting the DV-CP802AV Cables & Connectors Optical Digital OutputConnecting the DV-CP802 Connecting Your TV or Projector Video cable * suppliedConnecting the DV-CP802 Connecting an AV Receiver Analog Audio ConnectionDolby Digital, DTS, DVD-Audio & Sacd Analog Connection Connecting the DV-CP802 Connecting a Stereo AmpConnecting Components with Digital ConnectionConnect the power cord to a suit- able wall outlet Turning On the DV-CP802 & First Time SetupFirst Time Setup Turning On the DV-CP802Turning On the DV-CP802 & First Time Setup Use the Left and RightLoading Discs When you’ve ﬁnished, press the OPEN/CLOSE button againBasic Playback Press the OPEN/CLOSE buttonLoading Discs During Playback Basic PlaybackSelecting Discs Use the Disc Select 1-6 but- tons to select loaded discsStop Starting, Pausing & Stopping PlaybackPause To pause playback, press Pause button ButtonNavigating Disc Menus Load and select a DVD-Video, DVD-Audio, or VCD discSee pages 23 For example, to enter 2, press the 2 button Selecting Titles & Chapters by NumberUse the number buttons to spec- ify a chapter or title Load and select a DVD-Video discTo select tracks in the open folder Using the Disc NavigatorUse the Up and Down / buttons TOP Menu buttonWith the Disc Navigator open, press the Memory button Memory Playback in the Disc NavigatorPress the Stop button to stop Playback Playlist appears in place of the ﬁle Memory informationLoad and select a DVD-Audio, SACD, VCD, CD, or MP3 disc Selecting Tracks by NumberUse the number buttons to enter a track number During playback, press the Search buttonBasic Playback Fast Forward & Reverse Adjusting the Display Brightness Slow-motion PlaybackUsing Jpeg CDs Load and select a Jpeg CDYou can use the following func- tions during the slideshow Using Chain Mode To stop the slideshow, press the Stop or Menu buttonRepeat Playback Advanced PlaybackTime Search Press the Search button twiceAdvanced Playback Press the Play button to startSelect a disc To cancel random playback, useAdvanced Playback Random Playback Random button to select OffPress the Enter button Memory PlaybackPress the Memory button Repeat steps 2 and 3 to add more items to the listInserting New Items into the Memory List Deleting Items from the Memory ListSelecting Camera Angles Changing Items in the Memory ListSelecting Subtitles Using Progressive ScanningSelecting Languages & Audio Formats Press the Progressive but TonUsing Last Memory Displaying Information2nd press Normal1st press 3rd pressVCD & CD 1st press23rd press2 Advanced Playback Turning Off the Video Circuits Press the DV-CP802’s Video Circuit OFF buttonTo turn the video circuitry back on, press the button again Audio Menu Setting Description PictureConﬁguring the DV-CP802 LanguageConﬁguring the DV-CP802 Menu Setting DescriptionSetup OperationUsing the Onscreen Setup Menus Picture MenuTV Shape Interlaced Setting Progressive Setting Audio MenuDigital Out/Digital1 optical output Digital Out/Digital2 coaxial output Linear PCM OutSetting the Speaker Settings Analog Audio OutSetting the Speaker Distances Setting Levels With the Test Tone AV SynchronizationSelecting the AV Synchronization Sacd Audio Setup CD Audio SetupDynamic Range Control Dolby Digital Only Disc Menu Language Conﬁguring the DV-CP802 Language MenuOn-Screen Language Audio LanguageConﬁguring the DV-CP802 Display Menu Operation MenuPriority Contents Auto power offTitle/Group Stop Selecting Other Languages Conﬁguring the DV-CP802 Initial Setup MenuLanguage Code List Language CodeTroubleshooting Symptom Possible cause RemedyTroubleshooting Restoring the Default SettingsAbnormal Behavior Speciﬁcations and features subject to change without notice SpeciﬁcationsPage 3 4 3 7 1 Page Page Page