Setting the Video 1 Options
Expert denotes more detailed settings. If the item is not displayed, please refer to page 39 to display it.
■Setting the Component Video Output
Compared to a standard interlaced TV picture, a progressive scan TV is capable of stable,
Set only if you connected the COMPONENT VIDEO OUT jacks to a progressive
Make changes to the [Component Video] setting in the Setup screen Video 1 menu.
Audio Video1 V2 Language General
TV Screen — 16:9(Wide)
Component Video | Interlace |
Progressive | |
Screen Saver | Auto Progressive |
|
|
Move | SETUP Exit |
Settings: Interlace (Factory Setting)
Use this setting with regular TVs that are not compatible with progressive scan. Check the TV’s instruction manual if you are not sure about this.
Progressive
Use this setting with TVs and monitors that have progressive scan component video inputs. The PROGRESSIVE indicator lights up. Check the TV’s instruction manual if you are not sure about this.
PROGRESSIVE
Auto Progressive
Switches to progressive scan when 16:9 DVDs are played,4:3 DVDs uses interlace setting. Your TV/ monitor must be compatible with progressive scan to use this setting.
Tip
If this player is set to output
If your TV can not be switched between 4:3 and 16:9, set this player to [Interlace] or [Auto Progressive]. In Auto progressive mode, 4:3 discs will be played in Interlace mode, while discs that are recorded in both 4:3 and 16:9 will play in interlace mode during the 4:3 sections, and in progressive mode during the 16:9 parts. Switch your TV’s aspect ratio to the most suitable setting (for more details, see the manual that came with your TV). When set to [Auto Progressive], you may see picture disturbance when this player (and the TV) switches between progressive and interlace modes. This is not a malfunction of either this player or the TV. Picture disturbance should only occur when switching from a menu screen to the main feature, for example.
Note
If you connect a TV that is not compatible with a progressive scan signal and choose one of the progressive scan settings, you will not be able to see any picture at all. With your TV connected using either the composite or
■Switching the S-Video Output Expert
You can switch the kind of
Make changes in the
Audio Video1 V2 Language General
TV Screen | — 16:9(Wide) |
Component Video | — Interlace |
S1 | |
Screen Saver | S2 |
|
|
Move | SETUP Exit |
Settings: S1
S2 (Factory Setting)
■Turning the Screen Saver On and Off Expert
As a protective function against residual images on the TV screen or monitor, a phenomenon referred to as “screen burn”, the screen saver appears when the same screen has been displayed for a length of time. By default, the screen saver is turned on. However, the screen saver function can be turned on and off at your discretion.
Make changes to the [Screen Saver] setting in the Setup screen Video 1 menu in the [Expert] menu mode (page 39).
Audio | Video1 V2 Language | General |
| ||
|
| TV Screen — 16:9(Wide) |
| ||
| Component Video — Interlace |
| |||
|
|
| |||
| Screen Saver | On |
|
| |
|
|
| Off |
|
|
| Move |
| SETUP | Exit | |
Settings: | On (Factory setting) | ||||
|
| Off |
|
|
|
Note |
|
|
|
|
|
Pressing 8 (or £ ) displays a playback screen, and pressing 8 (or
£) again resumes playback.
43