Customizing the Settings
Audio Setting (continued)
Digital Audio Out | DVD VCD CD |
This sets the type of audio output from the digital audio output jack.
PCM: Select when connected to a 2 channel digital stereo amplifier (see page 16).
The DVD Player outputs sounds in the PCM format when you play a
The DVD Player does not output sounds in the PCM format when you play a
Dolby Digital: Select when you connected to an amplifier equipped with a Dolby Digital decorder (see page 16).
The DVD Player outputs digital audio information in the Dolby Digital format when you play a DVD- Video recorded in the Dolby Digital recording system.
The DVD Player does not output sounds in the PCM format when you play a
DTS: Select when you connected to an amplifier equipped with a DTS decorder (see page 16).
The DVD Player outputs digital audio information in the DTS format when you play a
The DVD Player outputs sounds in the Dolby Digital format when you play a
Dolby Digital and DTS
The
DOLBY DIGITAL Surround
DVD Video that have the 
mark are recorded using this system.
D I G I T A L
DTS Surround
DVD Video and CD that have the 
mark are recorded using this system.
Important: DTS information
If you set the Digital Audio Out setting to DTS, you must have your DVD player connected to a receiver or decoder with the DTS feature and the disc you play must support the DTS audio format. If you choose DTS and your receiver, decoder or disc doesn’t support DTS, you won’t hear any audio when you play the disc.
Linear PCM | DVD VCD CD |
96KHz ⇒ 48KHz: Even in case of 96 kHz digital signal, the DVD player will deliver 48 kHz signal out.
96KHz ⇒ 96KHz: In case of 96 kHz digital signal, the DVD player will deliver 96 kHz signal out. In this case, your receiver should control 96 kHz signal.
33